lkml.org 
[lkml]   [2019]   [Apr]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 4/7] net: stmmac: introducing support for DWC xPCS logics
> >> +/* MII MMD AN Status defines for C37 AN SGMII Status */
> >> +#define AN_STAT_C37_AN_CMPLT BIT(0) /* AN Complete Intr */
> >> +#define AN_STAT_C37_AN_FD BIT(1) /* Full Duplex */
> >> +#define AN_STAT_C37_AN_SPEED_SHIFT 2 /* AN Speed shift */
> >> +#define AN_STAT_C37_AN_SPEED GENMASK(3, 2) /* AN Speed */
> >> +#define AN_STAT_C37_AN_10MBPS 0x0 /* 10 Mbps */
> >> +#define AN_STAT_C37_AN_100MBPS 0x1 /* 100 Mbps
> >*/
> >> +#define AN_STAT_C37_AN_1000MBPS 0x2 /* 1000 Mbps
> >*/
> >> +#define AN_STAT_C37_AN_LNKSTS BIT(4) /* Link Status */
> >
> >Is these are standardized, not proprietary, consider adding them to
> >include/uapi/linux/mii.h so similar.
>
> Yeah, it does look very standardized. However, per DW spec, they are
> vendor-specific register set which uses MDIO_MMD_VEND2 to access.

Maybe you can go get the 802.3 standard and check section 37. If these
registers are the same, they could still be placed in mii.h. What MMD
you use is a different matter.

Andrew

\
 
 \ /
  Last update: 2019-04-25 05:21    [W:0.043 / U:4.636 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site