lkml.org 
[lkml]   [2019]   [Apr]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 5/5] i2c-mux-gpio: Create of-based GPIOs request method
Date
On 2019-04-24 14:34, Serge Semin wrote:
> Most modern platforms provide a dts with description of the devices
> available in the system. It may also include i2c-gpio-mux'es.
> Up until now the i2c-mux-gpio driver supported it' dts nodes, but
> performed the GPIOs request by means of legacy GPIO API, which by design
> and due to being legacy doesn't know anything about of/dtb/fdt/dts stuff.
> It means even though the i2c-gpio-mux dts nodes are successfully mapped
> to the kernel i2c-mux devices, the GPIOs used for initialization are
> requested without OF_GPIO_* flags setup. It causes problems on the
> platforms which fully rely on dts and reside, for instance,
> i2c-gpio-muxes with active low or open drain GPIOs connected.
>
> It is fixed by implementing a dedicated method for full dts-based
> GPIOs requests. It is mostly similar to the platform one, but
> utilizes the gpiod_get_from_of_node() method to request the GPIOs.
>
> Finally the platform code i2c-gpio-mux devices are also supported.
> So the fallback to dtb is performed only if array with GPIOs isn't
> detected.
>
> Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
> ---
> drivers/i2c/muxes/i2c-mux-gpio.c | 65 ++++++++++++++++++++++++--------
> 1 file changed, 50 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/i2c/muxes/i2c-mux-gpio.c b/drivers/i2c/muxes/i2c-mux-gpio.c
> index 317c019e1415..e5e10ba35ad9 100644
> --- a/drivers/i2c/muxes/i2c-mux-gpio.c
> +++ b/drivers/i2c/muxes/i2c-mux-gpio.c
> @@ -65,8 +65,8 @@ static int i2c_mux_gpio_probe_dt(struct gpiomux *mux,
> struct device_node *np = pdev->dev.of_node;
> struct device_node *adapter_np, *child;
> struct i2c_adapter *adapter;
> - unsigned *values, *gpios;
> - int i = 0, ret;
> + unsigned int *values;
> + int i = 0;
>
> if (!np)
> return -ENODEV;
> @@ -109,24 +109,48 @@ static int i2c_mux_gpio_probe_dt(struct gpiomux *mux,
> return -EINVAL;
> }
>
> - gpios = devm_kcalloc(&pdev->dev,
> - mux->data.n_gpios, sizeof(*mux->data.gpios),
> - GFP_KERNEL);
> - if (!gpios) {
> - dev_err(&pdev->dev, "Cannot allocate gpios array");
> - return -ENOMEM;
> - }
> + return 0;
> +}
> +
> +static int i2c_mux_gpio_request_dt(struct gpiomux *mux,
> + struct platform_device *pdev)
> +{
> + struct i2c_mux_core *muxc = platform_get_drvdata(pdev);
> + struct device_node *np = pdev->dev.of_node;
> + struct i2c_adapter *root;
> + struct device *gpio_dev;
> + enum gpiod_flags dflags;
> + int i, ret;
> +
> + root = i2c_root_adapter(&muxc->parent->dev);
>
> for (i = 0; i < mux->data.n_gpios; i++) {
> - ret = of_get_named_gpio(np, "mux-gpios", i);
> - if (ret < 0)
> - return ret;
> - gpios[i] = ret;
> - }
> + if (mux->data.idle & (1 << i))
> + dflags = GPIOD_OUT_HIGH;
> + else
> + dflags = GPIOD_OUT_LOW;
> +
> + mux->gpios[i] = gpiod_get_from_of_node(np, "mux-gpios", i,
> + dflags, "i2c-mux-gpio");
> + if (IS_ERR(mux->gpios[i])) {
> + ret = PTR_ERR(mux->gpios[i]);
> + goto err_request_gpio;
> + }
>
> - mux->data.gpios = gpios;
> + if (!muxc->mux_locked)
> + continue;
> +
> + gpio_dev = &mux->gpios[i]->gdev->dev;
> + muxc->mux_locked = i2c_root_adapter(gpio_dev) == root;
> + }
>
> return 0;
> +
> +err_request_gpio:
> + for (i--; i >= 0; i--)
> + gpiod_free(mux->gpios[i]);
> +
> + return ret;
> }
> #else
> static int i2c_mux_gpio_probe_dt(struct gpiomux *mux,
> @@ -134,6 +158,12 @@ static int i2c_mux_gpio_probe_dt(struct gpiomux *mux,
> {
> return -EINVAL;
> }
> +
> +static int i2c_mux_gpio_request_dt(struct gpiomux *mux,
> + struct platform_device *pdev)
> +{
> + return -EINVAL;
> +}
> #endif
>
> static int i2c_mux_gpio_probe_plat(struct gpiomux *mux,
> @@ -174,6 +204,9 @@ static int i2c_mux_gpio_request_plat(struct gpiomux *mux,
> struct device *gpio_dev;
> int i, ret;
>
> + if (!mux->data.gpios)
> + return -EINVAL;
> +
> root = i2c_root_adapter(&muxc->parent->dev);
>
> for (i = 0; i < mux->data.n_gpios; i++) {
> @@ -267,6 +300,8 @@ static int i2c_mux_gpio_probe(struct platform_device *pdev)
> mux->data.idle = mux->data.values[0];
>
> ret = i2c_mux_gpio_request_plat(mux, pdev);
> + if (ret)
> + ret = i2c_mux_gpio_request_dt(mux, pdev);
> if (ret)
> goto alloc_failed;

Same pattern as for 2/5; any and all errors from i2c_mux_gpio_request_plat
are now lost.

Cheers,
Peter

>
>

\
 
 \ /
  Last update: 2019-04-24 23:29    [W:0.122 / U:1.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site