lkml.org 
[lkml]   [2019]   [Apr]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 0/2] tty: serial: add DT bindings and serial driver for the SiFive FU540 UART
Hi Kevin,

On Fri, 19 Apr 2019, Kevin Hilman wrote:
> Atish Patra <atish.patra@wdc.com> writes:
> > On 4/18/19 4:22 PM, Kevin Hilman wrote:
> >> Paul Walmsley <paul.walmsley@sifive.com> writes:
> >>
> >>> This series adds a serial driver, with console support, for the
> >>> UART IP block present on the SiFive FU540 SoC. The programming
> >>> model is straightforward, but unique.
> >>>
> >>> Boot-tested on a SiFive FU540 HiFive-U board, using BBL and the
> >>> open-source FSBL (with appropriate patches to the DT data).
> >>>
> >>> This fifth version fixes a bug in the set_termios handler,
> >>> found by Andreas Schwab <schwab@suse.de>.
> >>>
> >>> The patches in this series can also be found, with the PRCI patches,
> >>> DT patches, and DT prerequisite patch, at:
> >>>
> >>> https://github.com/sifive/riscv-linux/tree/dev/paulw/serial-v5.1-rc4

...

> I've just updated to u-boot master branch with SMP enabled, and build a
> new openSBI (also from master branch) with u-boot payload. Using your
> v5.1-rc4_unleashed branch, I see 4 CPUs booting:
> https://termbin.com/kg13

Now that the serial driver is working for you, care to send a Tested-by: ?


thanks,

- Paul

\
 
 \ /
  Last update: 2019-04-24 21:00    [W:0.121 / U:1.628 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site