lkml.org 
[lkml]   [2019]   [Apr]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.19 37/96] iio/gyro/bmg160: Use millidegrees for temperature scale
Date
From: Mike Looijmans <mike.looijmans@topic.nl>

commit 40a7198a4a01037003c7ca714f0d048a61e729ac upstream.

Standard unit for temperature is millidegrees Celcius, whereas this driver
was reporting in degrees. Fix the scale factor in the driver.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/iio/gyro/bmg160_core.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/iio/gyro/bmg160_core.c
+++ b/drivers/iio/gyro/bmg160_core.c
@@ -582,11 +582,10 @@ static int bmg160_read_raw(struct iio_de
case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
return bmg160_get_filter(data, val);
case IIO_CHAN_INFO_SCALE:
- *val = 0;
switch (chan->type) {
case IIO_TEMP:
- *val2 = 500000;
- return IIO_VAL_INT_PLUS_MICRO;
+ *val = 500;
+ return IIO_VAL_INT;
case IIO_ANGL_VEL:
{
int i;
@@ -594,6 +593,7 @@ static int bmg160_read_raw(struct iio_de
for (i = 0; i < ARRAY_SIZE(bmg160_scale_table); ++i) {
if (bmg160_scale_table[i].dps_range ==
data->dps_range) {
+ *val = 0;
*val2 = bmg160_scale_table[i].scale;
return IIO_VAL_INT_PLUS_MICRO;
}

\
 
 \ /
  Last update: 2019-04-24 19:49    [W:0.307 / U:4.952 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site