lkml.org 
[lkml]   [2019]   [Apr]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.0 056/115] iio:chemical:bme680: Fix, report temperature in millidegrees
Date
From: Mike Looijmans <mike.looijmans@topic.nl>

commit 9436f45dd53595e21566a8c6627411077dfdb776 upstream.

The standard unit for temperature is millidegrees Celcius. Adapt the
driver to report in millidegrees instead of degrees.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Fixes: 1b3bd8592780 ("iio: chemical: Add support for Bosch BME680 sensor");
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/iio/chemical/bme680_core.c | 16 +++++++---------
1 file changed, 7 insertions(+), 9 deletions(-)

--- a/drivers/iio/chemical/bme680_core.c
+++ b/drivers/iio/chemical/bme680_core.c
@@ -583,8 +583,7 @@ static int bme680_gas_config(struct bme6
return ret;
}

-static int bme680_read_temp(struct bme680_data *data,
- int *val, int *val2)
+static int bme680_read_temp(struct bme680_data *data, int *val)
{
struct device *dev = regmap_get_device(data->regmap);
int ret;
@@ -617,10 +616,9 @@ static int bme680_read_temp(struct bme68
* compensate_press/compensate_humid to get compensated
* pressure/humidity readings.
*/
- if (val && val2) {
- *val = comp_temp;
- *val2 = 100;
- return IIO_VAL_FRACTIONAL;
+ if (val) {
+ *val = comp_temp * 10; /* Centidegrees to millidegrees */
+ return IIO_VAL_INT;
}

return ret;
@@ -635,7 +633,7 @@ static int bme680_read_press(struct bme6
s32 adc_press;

/* Read and compensate temperature to get a reading of t_fine */
- ret = bme680_read_temp(data, NULL, NULL);
+ ret = bme680_read_temp(data, NULL);
if (ret < 0)
return ret;

@@ -668,7 +666,7 @@ static int bme680_read_humid(struct bme6
u32 comp_humidity;

/* Read and compensate temperature to get a reading of t_fine */
- ret = bme680_read_temp(data, NULL, NULL);
+ ret = bme680_read_temp(data, NULL);
if (ret < 0)
return ret;

@@ -761,7 +759,7 @@ static int bme680_read_raw(struct iio_de
case IIO_CHAN_INFO_PROCESSED:
switch (chan->type) {
case IIO_TEMP:
- return bme680_read_temp(data, val, val2);
+ return bme680_read_temp(data, val);
case IIO_PRESSURE:
return bme680_read_press(data, val, val2);
case IIO_HUMIDITYRELATIVE:

\
 
 \ /
  Last update: 2019-04-24 19:43    [W:0.324 / U:4.900 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site