lkml.org 
[lkml]   [2019]   [Apr]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/2] thermal: rcar_gen3_thermal: fix IRQ issues
Date
There are issues with interrupt handling in rcar_gen3_thermal driver.

Currently IRQ is remain enabled after .remove, later if device is probed,
IRQ is requested before .thermal_init, this may cause IRQ function be
triggered but not able to clear IRQ status, thus cause system to hang.

Since the irq line isn't shared between different devices,
so the proper interrupt type flag should be IRQF_ONESHOT.

This patch-set fix these interrupt handling retated issues.

---
v3: fix to use correct code base
remove unused "flag" variable in rcar_gen3_thermal_irq

v2: use irq type IRQF_ONESHOT instead of IRQF_SHARED
disable interrupt in .remove

v1: initial version

Jiada Wang (2):
thermal: rcar_gen3_thermal: fix interrupt type
thermal: rcar_gen3_thermal: disable interrupt in .remove

Jiada Wang (2):
thermal: rcar_gen3_thermal: fix interrupt type
thermal: rcar_gen3_thermal: disable interrupt in .remove

drivers/thermal/rcar_gen3_thermal.c | 37 +++++++----------------------
1 file changed, 9 insertions(+), 28 deletions(-)

--
2.19.2

\
 
 \ /
  Last update: 2019-04-23 16:15    [W:0.047 / U:0.948 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site