lkml.org 
[lkml]   [2019]   [Apr]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 14/15] ARM: dts: imx6sll: correct ecspi/sdma compatible
Date
Correct ecspi/sdma compatible since ecspi errata ERR009165
not fixed on i.mx6sll chip.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
arch/arm/boot/dts/imx6sll.dtsi | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi
index 1b4899f..03f2103 100644
--- a/arch/arm/boot/dts/imx6sll.dtsi
+++ b/arch/arm/boot/dts/imx6sll.dtsi
@@ -183,7 +183,7 @@
};

ecspi1: spi@2008000 {
- compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+ compatible ="fsl,imx51-ecspi";
reg = <0x02008000 0x4000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
@@ -195,7 +195,7 @@
};

ecspi2: spi@200c000 {
- compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx51-ecspi";
reg = <0x0200c000 0x4000>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
@@ -207,7 +207,7 @@
};

ecspi3: spi@2010000 {
- compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx51-ecspi";
reg = <0x02010000 0x4000>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
@@ -219,7 +219,7 @@
};

ecspi4: spi@2014000 {
- compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+ compatible = "fsl,imx51-ecspi";
reg = <0x02014000 0x4000>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
@@ -619,7 +619,7 @@
};

sdma: dma-controller@20ec000 {
- compatible = "fsl,imx6sll-sdma", "fsl,imx35-sdma";
+ compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
reg = <0x020ec000 0x4000>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SLL_CLK_IPG>,
--
2.7.4
\
 
 \ /
  Last update: 2019-04-23 15:52    [W:0.256 / U:1.944 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site