lkml.org 
[lkml]   [2019]   [Apr]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH RESEND v3 4/4] pinctrl: add drive for I2C related pins on MT8183
On Tue, Apr 16, 2019 at 10:08 AM Matthias Brugger
<matthias.bgg@gmail.com> wrote:
> On 25/03/2019 13:41, Zhiyong Tao wrote:
> > This patch provides the advanced drive for I2C used pins on MT8183.
> > The detail strength specification description of the I2C pin:
> > When E1=0/E0=0, the strength is 0.125mA.
> > When E1=0/E0=1, the strength is 0.25mA.
> > When E1=1/E0=0, the strength is 0.5mA.
> > When E1=1/E0=1, the strength is 1mA.
> > For I2C pins, there are existing generic driving setup and the above
> > specific driving setup. I2C pins can only support 2/4/6/8/10/12/14/16mA
> > driving adjustment in generic driving setup. But in specific driving
> > setup, they can support 0.125/0.25/0.5/1mA adjustment.
> > If we enable specific driving setup for I2C pins,
> > the existing generic driving setup will be disabled.
> > For some special features, we need the I2C pins specific driving setup.
> > The specific driving setup is controlled by E1E0EN.
> > So we need add extra vendor driving preperty instead of the generic
> > driving property. We can add "mediatek,drive-strength-adv = <XXX>;"
> > to describe the specific driving setup property.
> > "XXX" means the value of E1E0EN. So the valid arguments of
> > "mediatek,drive-strength-adv" are from 0 to 7.
> >
> > Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com>
> > ---
> > drivers/pinctrl/mediatek/pinctrl-mt8183.c | 50 ++++++++++++++++++++++++
> > drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c | 47 ++++++++++++++++++++++
> > drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h | 11 ++++++
> > drivers/pinctrl/mediatek/pinctrl-paris.c | 12 ++++++
> > 4 files changed, 120 insertions(+)
> >
>
> Linus, did that fall through the cracks? Do you have any comments on this driver?

It's applied AFAICT. Maybe I forgot to push the branch, but its there.

Please confirm so I didn't miss anything!

Linus Walleij

\
 
 \ /
  Last update: 2019-04-23 13:00    [W:2.140 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site