lkml.org 
[lkml]   [2019]   [Apr]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V4 08/16] PCI: dwc: Add support to enable CDM register check
Date
Add support to enable CDM (Configuration Dependent Module) register check
for any data corruption based on the device-tree flag 'enable-cdm-check'.

Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
---
Changes since [v3]:
* None

Changes since [v2]:
* Changed code and commit description to reflect change in flag from
'cdm-check' to 'enable-cdm-check'

Changes since [v1]:
* This is a new patch in v2 series

drivers/pci/controller/dwc/pcie-designware.c | 7 +++++++
drivers/pci/controller/dwc/pcie-designware.h | 9 +++++++++
2 files changed, 16 insertions(+)

diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
index ecf5fe8842f6..0a5718d1f9aa 100644
--- a/drivers/pci/controller/dwc/pcie-designware.c
+++ b/drivers/pci/controller/dwc/pcie-designware.c
@@ -555,4 +555,11 @@ void dw_pcie_setup(struct dw_pcie *pci)
break;
}
dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, val);
+
+ if (of_property_read_bool(np, "enable-cdm-check")) {
+ val = dw_pcie_readl_dbi(pci, PCIE_PL_CHK_REG_CONTROL_STATUS);
+ val |= PCIE_PL_CHK_REG_CHK_REG_CONTINUOUS |
+ PCIE_PL_CHK_REG_CHK_REG_START;
+ dw_pcie_writel_dbi(pci, PCIE_PL_CHK_REG_CONTROL_STATUS, val);
+ }
}
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index 67307842e003..0b3323932fed 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -83,6 +83,15 @@
#define PCIE_MISC_CONTROL_1_OFF 0x8BC
#define PCIE_DBI_RO_WR_EN BIT(0)

+#define PCIE_PL_CHK_REG_CONTROL_STATUS 0xB20
+#define PCIE_PL_CHK_REG_CHK_REG_START BIT(0)
+#define PCIE_PL_CHK_REG_CHK_REG_CONTINUOUS BIT(1)
+#define PCIE_PL_CHK_REG_CHK_REG_COMPARISON_ERROR BIT(16)
+#define PCIE_PL_CHK_REG_CHK_REG_LOGIC_ERROR BIT(17)
+#define PCIE_PL_CHK_REG_CHK_REG_COMPLETE BIT(18)
+
+#define PCIE_PL_CHK_REG_ERR_ADDR 0xB28
+
/*
* iATU Unroll-specific register definitions
* From 4.80 core version the address translation will be made by unroll
--
2.17.1
\
 
 \ /
  Last update: 2019-04-23 10:29    [W:0.125 / U:2.524 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site