lkml.org 
[lkml]   [2019]   [Apr]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ASoC: DA7219: Fix failure in hw_params by not letting set_rate error out
Date
We need to set minimum bclk 64x of wclk as this is hw constraint in one
of the component used.
Since, clk_set_rate and clk is enabled in machine driver the
clk_set_rate in hw_params of da7219 fails and errors out and when it
tries to override the value.

In cases like these not only clk_set_rate of da7219 codec should fail
and not override the value but also should not error out.

Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
---
sound/soc/codecs/da7219.c | 8 +-------
1 file changed, 1 insertion(+), 7 deletions(-)

diff --git a/sound/soc/codecs/da7219.c b/sound/soc/codecs/da7219.c
index 5f5fa3416af3..a041dbf442af 100644
--- a/sound/soc/codecs/da7219.c
+++ b/sound/soc/codecs/da7219.c
@@ -1621,13 +1621,7 @@ static int da7219_hw_params(struct snd_pcm_substream *substream,

if (bclk) {
bclk_rate = frame_size * sr;
- ret = clk_set_rate(bclk, bclk_rate);
- if (ret) {
- dev_err(component->dev,
- "Failed to set BCLK rate %lu: %d\n",
- bclk_rate, ret);
- return ret;
- }
+ clk_set_rate(bclk, bclk_rate);
} else {
ret = da7219_set_bclks_per_wclk(component, frame_size);
if (ret) {
--
2.17.1
\
 
 \ /
  Last update: 2019-04-22 08:14    [W:0.053 / U:0.384 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site