lkml.org 
[lkml]   [2019]   [Apr]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 4/6] iio: imx7d_adc: Simplify imx7d_adc_probe() with imx7d_adc_resume()
On Sun, 14 Apr 2019 11:35:02 -0700
Andrey Smirnov <andrew.smirnov@gmail.com> wrote:

> Initialization sequence performed in imx7d_adc_resume() is exactly the
> same as the one being done in imx7d_adc_probe(). Make use of the
> former in the latter to avoid code duplication. Rename
> imx7d_adc_resume() to imx7d_adc_enable() for clarity while at it.
>
> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
> Cc: Jonathan Cameron <jic23@kernel.org>
> Cc: Hartmut Knaack <knaack.h@gmx.de>
> Cc: Lars-Peter Clausen <lars@metafoo.de>
> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
> Cc: Chris Healy <cphealy@gmail.com>
> Cc: linux-iio@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
Applied to the togreg branch of iio.git and pushed out as testing
for the autobuilders to play with it.

Thanks,

Jonathan

> ---
> drivers/iio/adc/imx7d_adc.c | 88 +++++++++++++++----------------------
> 1 file changed, 36 insertions(+), 52 deletions(-)
>
> diff --git a/drivers/iio/adc/imx7d_adc.c b/drivers/iio/adc/imx7d_adc.c
> index 147ee8575ad0..0922ee08546b 100644
> --- a/drivers/iio/adc/imx7d_adc.c
> +++ b/drivers/iio/adc/imx7d_adc.c
> @@ -434,6 +434,33 @@ static void imx7d_adc_power_down(struct imx7d_adc *info)
> writel(adc_cfg, info->regs + IMX7D_REG_ADC_ADC_CFG);
> }
>
> +static int imx7d_adc_enable(struct device *dev)
> +{
> + struct iio_dev *indio_dev = dev_get_drvdata(dev);
> + struct imx7d_adc *info = iio_priv(indio_dev);
> + int ret;
> +
> + ret = regulator_enable(info->vref);
> + if (ret) {
> + dev_err(info->dev,
> + "Can't enable adc reference top voltage, err = %d\n",
> + ret);
> + return ret;
> + }
> +
> + ret = clk_prepare_enable(info->clk);
> + if (ret) {
> + dev_err(info->dev,
> + "Could not prepare or enable clock.\n");
> + regulator_disable(info->vref);
> + return ret;
> + }
> +
> + imx7d_adc_hw_init(info);
> +
> + return 0;
> +}
> +
> static int imx7d_adc_probe(struct platform_device *pdev)
> {
> struct imx7d_adc *info;
> @@ -479,14 +506,6 @@ static int imx7d_adc_probe(struct platform_device *pdev)
> return ret;
> }
>
> - ret = regulator_enable(info->vref);
> - if (ret) {
> - dev_err(dev,
> - "Can't enable adc reference top voltage, err = %d\n",
> - ret);
> - return ret;
> - }
> -
> platform_set_drvdata(pdev, indio_dev);
>
> init_completion(&info->completion);
> @@ -498,38 +517,30 @@ static int imx7d_adc_probe(struct platform_device *pdev)
> indio_dev->channels = imx7d_adc_iio_channels;
> indio_dev->num_channels = ARRAY_SIZE(imx7d_adc_iio_channels);
>
> - ret = clk_prepare_enable(info->clk);
> - if (ret) {
> - dev_err(dev, "Could not prepare or enable the clock.\n");
> - goto error_adc_clk_enable;
> - }
> -
> ret = devm_request_irq(dev, irq,
> imx7d_adc_isr, 0,
> dev_name(dev), info);
> if (ret < 0) {
> dev_err(dev, "Failed requesting irq, irq = %d\n", irq);
> - goto error_iio_device_register;
> + return ret;
> }
>
> imx7d_adc_feature_config(info);
> - imx7d_adc_hw_init(info);
> +
> + ret = imx7d_adc_enable(&indio_dev->dev);
> + if (ret)
> + return ret;
>
> ret = iio_device_register(indio_dev);
> if (ret) {
> imx7d_adc_power_down(info);
> + clk_disable_unprepare(info->clk);
> + regulator_disable(info->vref);
> dev_err(&pdev->dev, "Couldn't register the device.\n");
> - goto error_iio_device_register;
> + return ret;
> }
>
> return 0;
> -
> -error_iio_device_register:
> - clk_disable_unprepare(info->clk);
> -error_adc_clk_enable:
> - regulator_disable(info->vref);
> -
> - return ret;
> }
>
> static int imx7d_adc_remove(struct platform_device *pdev)
> @@ -560,34 +571,7 @@ static int __maybe_unused imx7d_adc_suspend(struct device *dev)
> return 0;
> }
>
> -static int __maybe_unused imx7d_adc_resume(struct device *dev)
> -{
> - struct iio_dev *indio_dev = dev_get_drvdata(dev);
> - struct imx7d_adc *info = iio_priv(indio_dev);
> - int ret;
> -
> - ret = regulator_enable(info->vref);
> - if (ret) {
> - dev_err(info->dev,
> - "Can't enable adc reference top voltage, err = %d\n",
> - ret);
> - return ret;
> - }
> -
> - ret = clk_prepare_enable(info->clk);
> - if (ret) {
> - dev_err(info->dev,
> - "Could not prepare or enable clock.\n");
> - regulator_disable(info->vref);
> - return ret;
> - }
> -
> - imx7d_adc_hw_init(info);
> -
> - return 0;
> -}
> -
> -static SIMPLE_DEV_PM_OPS(imx7d_adc_pm_ops, imx7d_adc_suspend, imx7d_adc_resume);
> +static SIMPLE_DEV_PM_OPS(imx7d_adc_pm_ops, imx7d_adc_suspend, imx7d_adc_enable);
>
> static struct platform_driver imx7d_adc_driver = {
> .probe = imx7d_adc_probe,

\
 
 \ /
  Last update: 2019-04-22 12:07    [W:0.056 / U:73.160 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site