lkml.org 
[lkml]   [2019]   [Apr]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [alsa-devel] [PATCH] ASoC: fsl: sai: Fix clock source for mclk0
On Sun, Apr 21, 2019 at 10:26:40AM +0300, Daniel Baluta wrote:
> > Firstly, according to your commit message, neither imx8qm nor
> > imx6sx has an "mclk0" clock in the clock list. Either of them
> > starts with "mclk1". So, before you change the driver, I don't
> > think it's even a right thing to define an "mclk0" in the DT.
>
> From what I understand mclk0 means option 00b of MSEL bits which is:
> * busclk for i.MX8
> * mclk1 for i.MX6/7.

MSEL bit is used for an internal clock MUX to select four clock
inputs. However, these four clock inputs aren't exactly 1:1 of
SAI's inputs. As fas as I can tell, SAI only has one bus clock
and three MCLK[1-3]; the internal clock MUX maps the bus clock
or MCLK1 to its input0, and then linearly maps MCLK[1-3] to its
inputs[1-3]. So it doesn't sound right to me that you define an
"MCLK0" in the DT, as it's supposed to describe input clocks of
SAI block, other than its internal clock MUX's.

> Adding a mclk0 in the DT and making it point to the correct option
> (busclk or mclk1) does no harm as the driver doesn't yet parse mclk0.

I know it's making driver easier, but unfortunately it's not a
right thing to do from my point of view.

> >
> > > sai->mclk_clk[i] = devm_clk_get(&pdev->dev, tmp);
> > > if (IS_ERR(sai->mclk_clk[i])) {
> >
> > Secondly, this would break existing DT bindings of imx6sx and
> > imx7 platforms as they both have clock-names defined in DTB:
> > clock-names = "bus", "mclk1", "mclk2", "mclk3";
> > Since there's no "mclk0", the entire probe() would error-out.
>
> Not exactly. The probe won't error-out. It will just print a warning message

You're right about this part. I didn't look further as the patch
ends at the IS_ERR, so made a wrong assumption. Sorry.

> In my opinion, the current implementation of fsl_sai has a bug for imx6/7.
>
> Currently, fsl_sai.c driver does:
>
> sai->mclk_clk[0] = sai->bus_clk;
>
> is wrong, because on imx6/7 mclk_clk[0] should point to the same clk
> as mclk_clk[1]

You are right. It should be fixed, but not by this approach IMHO.

Thanks

\
 
 \ /
  Last update: 2019-04-21 10:05    [W:0.090 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site