lkml.org 
[lkml]   [2019]   [Apr]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectApplied "regulator: fan53555: Clean up unneeded fields from struct fan53555_device_info" to the regulator tree
Date
The patch

regulator: fan53555: Clean up unneeded fields from struct fan53555_device_info

has been applied to the regulator tree at

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.2

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From 30a56f1a6b8e116d8619b199d28687ddf09669d7 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@ingics.com>
Date: Fri, 19 Apr 2019 08:58:23 +0800
Subject: [PATCH] regulator: fan53555: Clean up unneeded fields from struct
fan53555_device_info

The *regmap and *rdev can be replaced by local variables.
The slew_rate is no longer used since commit dd7e71fbeefe
("regulator: fan53555: use set_ramp_delay to set the ramp up slew rate").

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/regulator/fan53555.c | 36 +++++++++++++++++-------------------
1 file changed, 17 insertions(+), 19 deletions(-)

diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c
index 771a06d1900d..e2caf4173ab5 100644
--- a/drivers/regulator/fan53555.c
+++ b/drivers/regulator/fan53555.c
@@ -91,10 +91,8 @@ enum {

struct fan53555_device_info {
enum fan53555_vendor vendor;
- struct regmap *regmap;
struct device *dev;
struct regulator_desc desc;
- struct regulator_dev *rdev;
struct regulator_init_data *regulator;
/* IC Type and Rev */
int chip_id;
@@ -106,8 +104,6 @@ struct fan53555_device_info {
unsigned int vsel_min;
unsigned int vsel_step;
unsigned int vsel_count;
- /* Voltage slew rate limiting */
- unsigned int slew_rate;
/* Mode */
unsigned int mode_reg;
unsigned int mode_mask;
@@ -125,7 +121,7 @@ static int fan53555_set_suspend_voltage(struct regulator_dev *rdev, int uV)
ret = regulator_map_voltage_linear(rdev, uV, uV);
if (ret < 0)
return ret;
- ret = regmap_update_bits(di->regmap, di->sleep_reg,
+ ret = regmap_update_bits(rdev->regmap, di->sleep_reg,
di->desc.vsel_mask, ret);
if (ret < 0)
return ret;
@@ -140,7 +136,7 @@ static int fan53555_set_suspend_enable(struct regulator_dev *rdev)
{
struct fan53555_device_info *di = rdev_get_drvdata(rdev);

- return regmap_update_bits(di->regmap, di->sleep_reg,
+ return regmap_update_bits(rdev->regmap, di->sleep_reg,
VSEL_BUCK_EN, VSEL_BUCK_EN);
}

@@ -148,7 +144,7 @@ static int fan53555_set_suspend_disable(struct regulator_dev *rdev)
{
struct fan53555_device_info *di = rdev_get_drvdata(rdev);

- return regmap_update_bits(di->regmap, di->sleep_reg,
+ return regmap_update_bits(rdev->regmap, di->sleep_reg,
VSEL_BUCK_EN, 0);
}

@@ -158,11 +154,11 @@ static int fan53555_set_mode(struct regulator_dev *rdev, unsigned int mode)

switch (mode) {
case REGULATOR_MODE_FAST:
- regmap_update_bits(di->regmap, di->mode_reg,
+ regmap_update_bits(rdev->regmap, di->mode_reg,
di->mode_mask, di->mode_mask);
break;
case REGULATOR_MODE_NORMAL:
- regmap_update_bits(di->regmap, di->vol_reg, di->mode_mask, 0);
+ regmap_update_bits(rdev->regmap, di->vol_reg, di->mode_mask, 0);
break;
default:
return -EINVAL;
@@ -176,7 +172,7 @@ static unsigned int fan53555_get_mode(struct regulator_dev *rdev)
unsigned int val;
int ret = 0;

- ret = regmap_read(di->regmap, di->mode_reg, &val);
+ ret = regmap_read(rdev->regmap, di->mode_reg, &val);
if (ret < 0)
return ret;
if (val & di->mode_mask)
@@ -213,7 +209,7 @@ static int fan53555_set_ramp(struct regulator_dev *rdev, int ramp)
return -EINVAL;
}

- return regmap_update_bits(di->regmap, FAN53555_CONTROL,
+ return regmap_update_bits(rdev->regmap, FAN53555_CONTROL,
CTL_SLEW_MASK, regval << CTL_SLEW_SHIFT);
}

@@ -396,6 +392,7 @@ static int fan53555_regulator_register(struct fan53555_device_info *di,
struct regulator_config *config)
{
struct regulator_desc *rdesc = &di->desc;
+ struct regulator_dev *rdev;

rdesc->name = "fan53555-reg";
rdesc->supply_name = "vin";
@@ -410,8 +407,8 @@ static int fan53555_regulator_register(struct fan53555_device_info *di,
rdesc->vsel_mask = di->vsel_count - 1;
rdesc->owner = THIS_MODULE;

- di->rdev = devm_regulator_register(di->dev, &di->desc, config);
- return PTR_ERR_OR_ZERO(di->rdev);
+ rdev = devm_regulator_register(di->dev, &di->desc, config);
+ return PTR_ERR_OR_ZERO(rdev);
}

static const struct regmap_config fan53555_regmap_config = {
@@ -466,6 +463,7 @@ static int fan53555_regulator_probe(struct i2c_client *client,
struct fan53555_device_info *di;
struct fan53555_platform_data *pdata;
struct regulator_config config = { };
+ struct regmap *regmap;
unsigned int val;
int ret;

@@ -502,22 +500,22 @@ static int fan53555_regulator_probe(struct i2c_client *client,
di->vendor = id->driver_data;
}

- di->regmap = devm_regmap_init_i2c(client, &fan53555_regmap_config);
- if (IS_ERR(di->regmap)) {
+ regmap = devm_regmap_init_i2c(client, &fan53555_regmap_config);
+ if (IS_ERR(regmap)) {
dev_err(&client->dev, "Failed to allocate regmap!\n");
- return PTR_ERR(di->regmap);
+ return PTR_ERR(regmap);
}
di->dev = &client->dev;
i2c_set_clientdata(client, di);
/* Get chip ID */
- ret = regmap_read(di->regmap, FAN53555_ID1, &val);
+ ret = regmap_read(regmap, FAN53555_ID1, &val);
if (ret < 0) {
dev_err(&client->dev, "Failed to get chip ID!\n");
return ret;
}
di->chip_id = val & DIE_ID;
/* Get chip revision */
- ret = regmap_read(di->regmap, FAN53555_ID2, &val);
+ ret = regmap_read(regmap, FAN53555_ID2, &val);
if (ret < 0) {
dev_err(&client->dev, "Failed to get chip Rev!\n");
return ret;
@@ -534,7 +532,7 @@ static int fan53555_regulator_probe(struct i2c_client *client,
/* Register regulator */
config.dev = di->dev;
config.init_data = di->regulator;
- config.regmap = di->regmap;
+ config.regmap = regmap;
config.driver_data = di;
config.of_node = np;

--
2.20.1
\
 
 \ /
  Last update: 2019-04-19 20:22    [W:0.071 / U:0.364 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site