lkml.org 
[lkml]   [2019]   [Apr]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 1/4] power: supply: max17040: Add IRQ handler for low SOC alert
From
Date


Em 4/15/19 4:10 AM, Krzysztof Kozlowski escreveu:
> On Mon, 15 Apr 2019 at 03:49, Matheus Castello <matheus@castello.eng.br> wrote:
>>
>> According datasheet max17040 has a pin for alert host for low SOC.
>> This pin can be used as external interrupt, so we need to check for
>> interrupts assigned for device and handle it.
>>
>> In hadler we are checking and storing fuel gauge registers values
>> and send an uevent to notificate user space, so user space can decide
>> save work or turn off since the alert demonstrate that the battery may
>> no have the power to keep the system turned on for much longer.
>>
>> Signed-off-by: Matheus Castello <matheus@castello.eng.br>
>> ---
>> drivers/power/supply/max17040_battery.c | 69 +++++++++++++++++++++++--
>> 1 file changed, 64 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/power/supply/max17040_battery.c b/drivers/power/supply/max17040_battery.c
>> index 91cafc7bed30..8d2f8ed3f44c 100644
>> --- a/drivers/power/supply/max17040_battery.c
>> +++ b/drivers/power/supply/max17040_battery.c
>> @@ -13,6 +13,7 @@
>> #include <linux/err.h>
>> #include <linux/i2c.h>
>> #include <linux/delay.h>
>> +#include <linux/interrupt.h>
>> #include <linux/power_supply.h>
>> #include <linux/max17040_battery.h>
>> #include <linux/slab.h>
>> @@ -160,21 +161,40 @@ static void max17040_get_status(struct i2c_client *client)
>> chip->status = POWER_SUPPLY_STATUS_FULL;
>> }
>>
>> +static void max17040_check_changes(struct i2c_client *client)
>> +{
>> + max17040_get_vcell(client);
>> + max17040_get_soc(client);
>> + max17040_get_online(client);
>> + max17040_get_status(client);
>> +}
>> +
>> static void max17040_work(struct work_struct *work)
>> {
>> struct max17040_chip *chip;
>>
>> chip = container_of(work, struct max17040_chip, work.work);
>> -
>> - max17040_get_vcell(chip->client);
>> - max17040_get_soc(chip->client);
>> - max17040_get_online(chip->client);
>> - max17040_get_status(chip->client);
>> + max17040_check_changes(chip->client);
>>
>> queue_delayed_work(system_power_efficient_wq, &chip->work,
>> MAX17040_DELAY);
>> }
>>
>> +static irqreturn_t max17040_thread_handler(int id, void *dev)
>> +{
>> + struct max17040_chip *chip = dev;
>> + struct i2c_client *client = chip->client;
>> +
>> + dev_warn(&client->dev, "IRQ: Alert battery low level");
>> + /* read registers */
>> + max17040_check_changes(chip->client);
>> +
>> + /* send uevent */
>> + power_supply_changed(chip->battery);
>> +
>> + return IRQ_HANDLED;
>> +}
>> +
>> static enum power_supply_property max17040_battery_props[] = {
>> POWER_SUPPLY_PROP_STATUS,
>> POWER_SUPPLY_PROP_ONLINE,
>> @@ -217,6 +237,27 @@ static int max17040_probe(struct i2c_client *client,
>> return PTR_ERR(chip->battery);
>> }
>>
>> + /* check interrupt */
>> + if (client->irq) {
>> + int ret;
>> + unsigned int flags;
>> +
>> + dev_info(&client->dev, "IRQ: enabled\n");
>> + flags = IRQF_TRIGGER_FALLING | IRQF_ONESHOT;
>> +
>> + ret = devm_request_threaded_irq(&client->dev, client->irq, NULL,
>> + max17040_thread_handler, flags,
>> + chip->battery->desc->name,
>> + chip);
>> +
>> + if (ret) {
>> + client->irq = 0;
>> + if (ret != -EBUSY)
>
> Why not on EBUSY?
>
>> + dev_warn(&client->dev,
>> + "Failed to get IRQ err %d\n", ret);
>> + }
>> + }
>> +
>> max17040_reset(client);
>> max17040_get_version(client);
>>
>> @@ -224,6 +265,8 @@ static int max17040_probe(struct i2c_client *client,
>> queue_delayed_work(system_power_efficient_wq, &chip->work,
>> MAX17040_DELAY);
>>
>> + device_init_wakeup(&client->dev, 1);
>
> Either you parse DT for wakeup-source property and use it... or you
> unconditionally enable wakeup. In the second case - there is no point
> to check later for device_may_wakeup(). Instead check the return value
> of device_init_wakeup().
>
>> +
>> return 0;
>> }
>>
>> @@ -244,6 +287,14 @@ static int max17040_suspend(struct device *dev)
>> struct max17040_chip *chip = i2c_get_clientdata(client);
>>
>> cancel_delayed_work(&chip->work);
>> +
>> + if (client->irq) {
>> + if (device_may_wakeup(dev))
>> + enable_irq_wake(client->irq);
>> + else
>> + disable_irq_wake(client->irq);
>
> Did you try the wakeup from suspend? You do not have a disable_irq()
> here which usually was needed for interrupts to work properly on
> suspend. Maybe this was fixed?
>
> Best regards,
> Krzysztof
>
Hi Krzysztof,

I test it using mem state and suspend, resuming seems to have worked
correctly ...

Thanks for the review, I'm working in your suggestions and I expect to
send v3 this weekend.

Best Regards,
Matheus Castello

\
 
 \ /
  Last update: 2019-04-19 21:03    [W:0.077 / U:1.428 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site