lkml.org 
[lkml]   [2019]   [Apr]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 17/28] userfaultfd: wp: support swap and page migration
On Fri, Apr 19, 2019 at 03:42:20PM +0800, Peter Xu wrote:
> On Thu, Apr 18, 2019 at 04:59:07PM -0400, Jerome Glisse wrote:
> > On Wed, Mar 20, 2019 at 10:06:31AM +0800, Peter Xu wrote:
> > > For either swap and page migration, we all use the bit 2 of the entry to
> > > identify whether this entry is uffd write-protected. It plays a similar
> > > role as the existing soft dirty bit in swap entries but only for keeping
> > > the uffd-wp tracking for a specific PTE/PMD.
> > >
> > > Something special here is that when we want to recover the uffd-wp bit
> > > from a swap/migration entry to the PTE bit we'll also need to take care
> > > of the _PAGE_RW bit and make sure it's cleared, otherwise even with the
> > > _PAGE_UFFD_WP bit we can't trap it at all.
> > >
> > > Note that this patch removed two lines from "userfaultfd: wp: hook
> > > userfault handler to write protection fault" where we try to remove the
> > > VM_FAULT_WRITE from vmf->flags when uffd-wp is set for the VMA. This
> > > patch will still keep the write flag there.
> > >
> > > Reviewed-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
> > > Signed-off-by: Peter Xu <peterx@redhat.com>
> >
> > Some missing thing see below.
> >
> > [...]
> >
> > > diff --git a/mm/memory.c b/mm/memory.c
> > > index 6405d56debee..c3d57fa890f2 100644
> > > --- a/mm/memory.c
> > > +++ b/mm/memory.c
> > > @@ -736,6 +736,8 @@ copy_one_pte(struct mm_struct *dst_mm, struct mm_struct *src_mm,
> > > pte = swp_entry_to_pte(entry);
> > > if (pte_swp_soft_dirty(*src_pte))
> > > pte = pte_swp_mksoft_dirty(pte);
> > > + if (pte_swp_uffd_wp(*src_pte))
> > > + pte = pte_swp_mkuffd_wp(pte);
> > > set_pte_at(src_mm, addr, src_pte, pte);
> > > }
> > > } else if (is_device_private_entry(entry)) {
> >
> > You need to handle the is_device_private_entry() as the migration case
> > too.
>
> Hi, Jerome,
>
> Yes I can simply add the handling, but I'd confess I haven't thought
> clearly yet on how userfault-wp will be used with HMM (and that's
> mostly because my unfamiliarity so far with HMM). Could you give me
> some hint on a most general and possible scenario?

device private is just a temporary state with HMM you can have thing
like GPU or FPGA migrate some anonymous page to their local memory
because it is use by the GPU or the FPGA. The GPU or FPGA behave like
a CPU from mm POV so if it wants to write it will fault and go through
the regular CPU page fault.

That said it can still migrate a page that is UFD write protected just
because the device only care about reading. So if you have a UFD pte
to a regular page that get migrated to some device memory you want to
keep the UFD WP flags after the migration (in both direction when going
to device memory and from coming back from it).

As far as UFD is concern this is just another page, it just does not
have a valid pte entry because CPU can not access such memory. But from
mm point of view it just another page.

>
> >
> >
> >
> > > @@ -2825,6 +2827,10 @@ vm_fault_t do_swap_page(struct vm_fault *vmf)
> > > flush_icache_page(vma, page);
> > > if (pte_swp_soft_dirty(vmf->orig_pte))
> > > pte = pte_mksoft_dirty(pte);
> > > + if (pte_swp_uffd_wp(vmf->orig_pte)) {
> > > + pte = pte_mkuffd_wp(pte);
> > > + pte = pte_wrprotect(pte);
> > > + }
> > > set_pte_at(vma->vm_mm, vmf->address, vmf->pte, pte);
> > > arch_do_swap_page(vma->vm_mm, vma, vmf->address, pte, vmf->orig_pte);
> > > vmf->orig_pte = pte;
> > > diff --git a/mm/migrate.c b/mm/migrate.c
> > > index 181f5d2718a9..72cde187d4a1 100644
> > > --- a/mm/migrate.c
> > > +++ b/mm/migrate.c
> > > @@ -241,6 +241,8 @@ static bool remove_migration_pte(struct page *page, struct vm_area_struct *vma,
> > > entry = pte_to_swp_entry(*pvmw.pte);
> > > if (is_write_migration_entry(entry))
> > > pte = maybe_mkwrite(pte, vma);
> > > + else if (pte_swp_uffd_wp(*pvmw.pte))
> > > + pte = pte_mkuffd_wp(pte);
> > >
> > > if (unlikely(is_zone_device_page(new))) {
> > > if (is_device_private_page(new)) {
> >
> > You need to handle is_device_private_page() case ie mark its swap
> > as uffd_wp
>
> Yes I can do this too.
>
> >
> > > @@ -2301,6 +2303,8 @@ static int migrate_vma_collect_pmd(pmd_t *pmdp,
> > > swp_pte = swp_entry_to_pte(entry);
> > > if (pte_soft_dirty(pte))
> > > swp_pte = pte_swp_mksoft_dirty(swp_pte);
> > > + if (pte_uffd_wp(pte))
> > > + swp_pte = pte_swp_mkuffd_wp(swp_pte);
> > > set_pte_at(mm, addr, ptep, swp_pte);
> > >
> > > /*
> > > diff --git a/mm/mprotect.c b/mm/mprotect.c
> > > index 855dddb07ff2..96c0f521099d 100644
> > > --- a/mm/mprotect.c
> > > +++ b/mm/mprotect.c
> > > @@ -196,6 +196,8 @@ static unsigned long change_pte_range(struct vm_area_struct *vma, pmd_t *pmd,
> > > newpte = swp_entry_to_pte(entry);
> > > if (pte_swp_soft_dirty(oldpte))
> > > newpte = pte_swp_mksoft_dirty(newpte);
> > > + if (pte_swp_uffd_wp(oldpte))
> > > + newpte = pte_swp_mkuffd_wp(newpte);
> > > set_pte_at(mm, addr, pte, newpte);
> > >
> > > pages++;
> >
> > Need to handle is_write_device_private_entry() case just below
> > that chunk.
>
> This one is a bit special - because it's not only the private entries
> that are missing but also all swap/migration entries, which is
> explicitly handled by patch 25. But I think I can just squash it into
> this patch as you suggested.

Yeah i was reading thing in order and you can do that in patch 25.

Cheers,
Jérôme

\
 
 \ /
  Last update: 2019-04-19 20:44    [W:0.071 / U:0.244 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site