lkml.org 
[lkml]   [2019]   [Apr]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] nvme: determine the number of IO queues
From
Date
On 4/18/19 1:33 AM, Maxim Levitsky wrote:
> On Wed, 2019-04-17 at 20:32 +0300, Maxim Levitsky wrote:
>> On Wed, 2019-04-17 at 22:12 +0800, Aaron Ma wrote:
>>> Some controllers support limited IO queues, when over set
>>> the number, it will return invalid field error.
>>> Then NVME will be removed by driver.
>>>
>>> Find the max number of IO queues that controller supports.
>>> When it still got invalid result, set 1 IO queue at least to
>>> bring NVME online.
>> To be honest a spec compliant device should not need this.
>> The spec states:
>>
>> "Number of I/O Completion Queues Requested (NCQR): Indicates the number of I/O
>> Completion
>> Queues requested by software. This number does not include the Admin
>> Completion
>> Queue. A
>> minimum of one queue shall be requested, reflecting that the minimum support
>> is
>> for one I/O
>> Completion Queue. This is a 0’s based value. The maximum value that may be
>> specified is 65,534
>> (i.e., 65,535 I/O Completion Queues). If the value specified is 65,535, the
>> controller should return
>> an error of Invalid Field in Command."
>>
>>
>> This implies that you can ask for any value and the controller must not
>> respond
>> with an error, but rather indicate how many queues it supports.
>>
>> Maybe its better to add a quirk for the broken device, which needs this?

Adding quirk only makes the code more complicated.
This patch doesn't change the default behavior.
Only handle the NVME error code.

Yes the IO queues number is 0's based, but driver would return error and
remove the nvme device as dead.

So set it as 1 at least the NVME can be probed properly.

Regards,
Aaron

> I forgot to add the relevant paragraph:
>
> "Note: The value allocated may be smaller or larger than the number of queues
> requested, often in virtualized
> implementations. The controller may not have as many queues to allocate as are
> requested. Alternatively,
> the controller may have an allocation unit of queues (e.g. power of two) and may
> supply more queues to
> host software to satisfy its allocation unit."
>
>
> Best regards,
> Maxim Levitsky
>

\
 
 \ /
  Last update: 2019-04-18 08:23    [W:0.146 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site