lkml.org 
[lkml]   [2019]   [Apr]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] docs: hwmon: convert three docs to ReST format
Date
On Thu, 18 Apr 2019, Mauro Carvalho Chehab <mchehab+samsung@kernel.org> wrote:
> Those three new drivers were missed on the initial conversion
> to ReST format. So:
>
> - Rename them to .rst;
> - Add them to the hwmon index.rst index;
> - add some blank lines at the "Supported systems:" part, in
> order to allow Sphinx to properly identify new lines,
> suppressing warnings and avoid it to output some random
> lines in bold;
> - When multiple authors are involved, change the authors
> part to a list, in order to avoid adding blank lines.
> - adjust the table cells (one of the tables seemed to be
> assuming that tab is 4 positions instead of 8) and add
> the table markup.
> - be sure that the section markups have the same number of
> characters as the section title.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
> ---
> Documentation/hwmon/index.rst | 3 +++
> Documentation/hwmon/{ir38064 => ir38064.rst} | 21 ++++++++++++-------
> .../hwmon/{isl68137 => isl68137.rst} | 16 ++++++++++----
> .../hwmon/{lochnagar => lochnagar.rst} | 7 +++++--
> 4 files changed, 33 insertions(+), 14 deletions(-)
> rename Documentation/hwmon/{ir38064 => ir38064.rst} (76%)
> rename Documentation/hwmon/{isl68137 => isl68137.rst} (85%)
> rename Documentation/hwmon/{lochnagar => lochnagar.rst} (93%)
>
> diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
> index 893804414510..3fa14fe7b49c 100644
> --- a/Documentation/hwmon/index.rst
> +++ b/Documentation/hwmon/index.rst
> @@ -65,6 +65,8 @@ Hardware Monitoring Kernel Drivers
> ina2xx.rst
> ina3221.rst
> ir35221.rst
> + ir38064.rst
> + isl68137.rst

Didn't notice it on the first patch adding index.rst, but I don't think
it's customary to add .rst suffix to the toctree.

BR,
Jani.

> it87.rst
> jc42.rst
> k10temp.rst
> @@ -86,6 +88,7 @@ Hardware Monitoring Kernel Drivers
> lm93.rst
> lm95234.rst
> lm95245.rst
> + lochnagar.rst
> ltc2945.rst
> ltc2978.rst
> ltc2990.rst
> diff --git a/Documentation/hwmon/ir38064 b/Documentation/hwmon/ir38064.rst
> similarity index 76%
> rename from Documentation/hwmon/ir38064
> rename to Documentation/hwmon/ir38064.rst
> index 9f218c39bfe6..c455d755a267 100644
> --- a/Documentation/hwmon/ir38064
> +++ b/Documentation/hwmon/ir38064.rst
> @@ -2,15 +2,18 @@ Kernel driver ir38064
> =====================
>
> Supported chips:
> +
> * Infineon IR38064
> +
> Prefix: 'ir38064'
> Addresses scanned: -
> +
> Datasheet: Publicly available at the Infineon webiste
> https://www.infineon.com/dgdl/Infineon-IR38064MTRPBF-DS-v03_07-EN.pdf?fileId=5546d462584d1d4a0158db0d9efb67ca
>
> Authors:
> - Maxim Sloyko <maxims@google.com>
> - Patrick Venture <venture@google.com>
> + - Maxim Sloyko <maxims@google.com>
> + - Patrick Venture <venture@google.com>
>
> Description
> -----------
> @@ -26,29 +29,30 @@ devices explicitly.
> Sysfs attributes
> ----------------
>
> +======================= ===========================
> curr1_label "iout1"
> curr1_input Measured output current
> curr1_crit Critical maximum current
> curr1_crit_alarm Current critical high alarm
> curr1_max Maximum current
> -curr1_max_alarm Current high alarm
> +curr1_max_alarm Current high alarm
>
> in1_label "vin"
> in1_input Measured input voltage
> in1_crit Critical maximum input voltage
> in1_crit_alarm Input voltage critical high alarm
> -in1_min Minimum input voltage
> +in1_min Minimum input voltage
> in1_min_alarm Input voltage low alarm
>
> in2_label "vout1"
> in2_input Measured output voltage
> in2_lcrit Critical minimum output voltage
> -in2_lcrit_alarm Output voltage critical low alarm
> +in2_lcrit_alarm Output voltage critical low alarm
> in2_crit Critical maximum output voltage
> in2_crit_alarm Output voltage critical high alarm
> -in2_max Maximum output voltage
> +in2_max Maximum output voltage
> in2_max_alarm Output voltage high alarm
> -in2_min Minimum output voltage
> +in2_min Minimum output voltage
> in2_min_alarm Output voltage low alarm
>
> power1_label "pout1"
> @@ -58,4 +62,5 @@ temp1_input Measured temperature
> temp1_crit Critical high temperature
> temp1_crit_alarm Chip temperature critical high alarm
> temp1_max Maximum temperature
> -temp1_max_alarm Chip temperature high alarm
> +temp1_max_alarm Chip temperature high alarm
> +======================= ===========================
> diff --git a/Documentation/hwmon/isl68137 b/Documentation/hwmon/isl68137.rst
> similarity index 85%
> rename from Documentation/hwmon/isl68137
> rename to Documentation/hwmon/isl68137.rst
> index 92e5c5fc5b77..a5a7c8545c9e 100644
> --- a/Documentation/hwmon/isl68137
> +++ b/Documentation/hwmon/isl68137.rst
> @@ -2,16 +2,22 @@ Kernel driver isl68137
> ======================
>
> Supported chips:
> +
> * Intersil ISL68137
> +
> Prefix: 'isl68137'
> +
> Addresses scanned: -
> - Datasheet: Publicly available at the Intersil website
> +
> + Datasheet:
> +
> + Publicly available at the Intersil website
> https://www.intersil.com/content/dam/Intersil/documents/isl6/isl68137.pdf
>
> Authors:
> - Maxim Sloyko <maxims@google.com>
> - Robert Lippert <rlippert@google.com>
> - Patrick Venture <venture@google.com>
> + - Maxim Sloyko <maxims@google.com>
> + - Robert Lippert <rlippert@google.com>
> + - Patrick Venture <venture@google.com>
>
> Description
> -----------
> @@ -32,6 +38,7 @@ Beyond the normal sysfs pmbus attributes, the driver exposes a control attribute
> Additional Sysfs attributes
> ---------------------------
>
> +======================= ====================================
> avs(0|1)_enable Controls the AVS state of each rail.
>
> curr1_label "iin"
> @@ -70,3 +77,4 @@ temp[1-3]_crit Critical high temperature
> temp[1-3]_crit_alarm Chip temperature critical high alarm
> temp[1-3]_max Maximum temperature
> temp[1-3]_max_alarm Chip temperature high alarm
> +======================= ====================================
> diff --git a/Documentation/hwmon/lochnagar b/Documentation/hwmon/lochnagar.rst
> similarity index 93%
> rename from Documentation/hwmon/lochnagar
> rename to Documentation/hwmon/lochnagar.rst
> index e9686fb3eb40..1d609c4d18c3 100644
> --- a/Documentation/hwmon/lochnagar
> +++ b/Documentation/hwmon/lochnagar.rst
> @@ -1,5 +1,5 @@
> Kernel Driver Lochnagar
> -========================
> +=======================
>
> Supported systems:
> * Cirrus Logic : Lochnagar 2
> @@ -21,6 +21,7 @@ by software.
> Sysfs attributes
> ----------------
>
> +======================= =======================================================
> temp1_input The Lochnagar board temperature (milliCelsius)
> in0_input Measured voltage for DBVDD1 (milliVolts)
> in0_label "DBVDD1"
> @@ -76,5 +77,7 @@ curr8_label "MICVDD"
> power8_average Measured average power for MICVDD (microWatts)
> power8_average_interval Power averaging time input valid from 1 to 1708mS
> power8_label "MICVDD"
> +======================= =======================================================
>
> -Note: It is not possible to measure voltage on the SYSVDD rail.
> +Note:
> + It is not possible to measure voltage on the SYSVDD rail.

--
Jani Nikula, Intel Open Source Graphics Center

\
 
 \ /
  Last update: 2019-04-18 16:43    [W:0.308 / U:0.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site