lkml.org 
[lkml]   [2019]   [Apr]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 1/2] arm64: dts: allwinner: a64-amarula-relic: Add GT5663 CTP node
On Thu, Apr 18, 2019 at 07:18:37PM +0530, Jagan Teki wrote:
> Add Goodix GT5663 capacitive touch controller node on
> Amarula A64-Relic board.
>
> The CTP connected to board with,
> - SDA, SCK from i2c1
> - GPIO-LD0 as AVDD28 supply
> - PH4 gpio as interrupt pin
> - PH8 gpio as reset pin
> - X axis is inverted
> - Y axis is inverted
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> Changes for v3:
> - Use 2.8v for reg_ldo_io0
> Changes for v2:
> - drop i2c1, bias-pull-up
>
> .../allwinner/sun50i-a64-amarula-relic.dts | 25 +++++++++++++++++++
> 1 file changed, 25 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts
> index 3575db216016..bd31a4385bc1 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts
> @@ -49,6 +49,24 @@
> bias-pull-up;
> };
>
> +&i2c1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c1_pins>;

You haven't fixed this, and you didn't either in the second patch.

Maxime
--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2019-04-18 16:05    [W:0.048 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site