lkml.org 
[lkml]   [2019]   [Apr]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/2] arm64: dts: allwinner: a64-amarula-relic: Add GT5663 CTP node
On Thu, Apr 18, 2019 at 02:05:42PM +0530, Jagan Teki wrote:
> Add Goodix GT5663 capacitive touch controller node on
> Amarula A64-Relic board.
>
> The CTP connected to board with,
> - SDA, SCK from i2c1
> - GPIO-LD0 as AVDD28 supply
> - PH4 gpio as interrupt pin
> - PH8 gpio as reset pin
> - X axis is inverted
> - Y axis is inverted
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> Changes for v2:
> - drop i2c1, bias-pull-up
>
> .../allwinner/sun50i-a64-amarula-relic.dts | 25 +++++++++++++++++++
> 1 file changed, 25 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts
> index 3575db216016..3819ce396073 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts
> @@ -49,6 +49,24 @@
> bias-pull-up;
> };
>
> +&i2c1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c1_pins>;

That's the default already

> + status = "okay";
> +
> + touchscreen@5d {
> + compatible = "goodix,gt5663";
> + reg = <0x5d>;
> + AVDD28-supply = <&reg_ldo_io0>; /* VCC-CTP: GPIO0-LDO */
> + interrupt-parent = <&pio>;
> + interrupts = <7 4 IRQ_TYPE_EDGE_FALLING>;
> + irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* CTP-INT: PH4 */
> + reset-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* CTP-RST: PH8 */
> + touchscreen-inverted-x;
> + touchscreen-inverted-y;
> + };
> +};
> +
> &mmc1 {
> pinctrl-names = "default";
> pinctrl-0 = <&mmc1_pins>;
> @@ -212,6 +230,13 @@
> regulator-name = "vdd-cpus";
> };
>
> +&reg_ldo_io0 {
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;

The name of that regulator is AVDD28, which indicates that it would be
a 2.8V regulator?

Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2019-04-18 13:25    [W:0.076 / U:1.364 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site