lkml.org 
[lkml]   [2019]   [Apr]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.14 91/92] net: stmmac: Set dma ring length before enabling the DMA
Date
From: Lars Persson <lars.persson@axis.com>

This was fixed in upstream by commit 7d9e6c5afab6 ("net: stmmac: Integrate
XGMAC into main driver flow") that is a new feature commit.

We found a race condition in the DMA init sequence that hits if the
PHY already has link up during stmmac_hw_setup. Since the ring length
was programmed after enabling the RX path, we might receive a packet
before the correct ring length is programmed. When that happened we
could not get reliable interrupts for DMA RX and the MTL complained
about RX FIFO overrun.

Signed-off-by: Lars Persson <larper@axis.com>
Cc: stable@vger.kernel.org # 4.14.x
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -2536,9 +2536,6 @@ static int stmmac_hw_setup(struct net_de
netdev_warn(priv->dev, "%s: failed debugFS registration\n",
__func__);
#endif
- /* Start the ball rolling... */
- stmmac_start_all_dma(priv);
-
priv->tx_lpi_timer = STMMAC_DEFAULT_TWT_LS;

if ((priv->use_riwt) && (priv->hw->dma->rx_watchdog)) {
@@ -2558,6 +2555,9 @@ static int stmmac_hw_setup(struct net_de
priv->hw->dma->enable_tso(priv->ioaddr, 1, chan);
}

+ /* Start the ball rolling... */
+ stmmac_start_all_dma(priv);
+
return 0;
}


\
 
 \ /
  Last update: 2019-04-18 20:23    [W:0.316 / U:0.668 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site