lkml.org 
[lkml]   [2019]   [Apr]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v5 07/13] phy: Add usb phy support for hi3660 Soc of Hisilicon
From
Date
Hi,

On 29/03/19 9:44 AM, Yu Chen wrote:
> This driver handles usb phy power on and shutdown for hi3660 Soc of
> Hisilicon.
>
> Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
> Cc: Kishon Vijay Abraham I <kishon@ti.com>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
> Cc: Andrew Morton <akpm@linux-foundation.org>
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: Pengcheng Li <lpc.li@hisilicon.com>
> Cc: Jianguo Sun <sunjianguo1@huawei.com>
> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
> Cc: Jiancheng Xue <xuejiancheng@hisilicon.com>
> Cc: John Stultz <john.stultz@linaro.org>
> Cc: Binghui Wang <wangbinghui@hisilicon.com>
> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
> Signed-off-by: Yu Chen <chenyu56@huawei.com>
> ---
> v1:
> * Remove unused code and add comment for time delay as suggested by
> Kishon Vijay Abraham I.
> v2:
> * Fix license declaration.
> * Remove redundant parens.
> * Remove unused member variables in struct hi3660_priv.
> v4:
> * Add comments for HI3660_USB_DEFAULT_PHY_PARAM.
> * Add margin for usleep_range.
> * Get regmap of otg_bc from parent's of_node.
> ---
> ---
> MAINTAINERS | 8 ++
> drivers/phy/hisilicon/Kconfig | 10 ++
> drivers/phy/hisilicon/Makefile | 1 +
> drivers/phy/hisilicon/phy-hi3660-usb3.c | 233 ++++++++++++++++++++++++++++++++
> 4 files changed, 252 insertions(+)
> create mode 100644 drivers/phy/hisilicon/phy-hi3660-usb3.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 3e5a5d263f29..c0057dd82dbd 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -16084,6 +16084,14 @@ L: linux-usb@vger.kernel.org
> S: Maintained
> F: drivers/usb/roles/intel-xhci-usb-role-switch.c
>
> +USB IP DRIVER FOR HISILICON KIRIN
> +M: Yu Chen <chenyu56@huawei.com>
> +M: Binghui Wang <wangbinghui@hisilicon.com>
> +L: linux-usb@vger.kernel.org
> +S: Maintained
> +F: Documentation/devicetree/bindings/phy/phy-hi3660-usb3.txt

I don't seem to have received the dt-binding patch. Can you please resend with
updated tags?

Thanks
Kishon

> +F: drivers/phy/hisilicon/phy-hi3660-usb3.c
> +
> USB ISP116X DRIVER
> M: Olav Kongas <ok@artecdesign.ee>
> L: linux-usb@vger.kernel.org
> diff --git a/drivers/phy/hisilicon/Kconfig b/drivers/phy/hisilicon/Kconfig
> index b40ee54a1a50..3c142f08987c 100644
> --- a/drivers/phy/hisilicon/Kconfig
> +++ b/drivers/phy/hisilicon/Kconfig
> @@ -12,6 +12,16 @@ config PHY_HI6220_USB
>
> To compile this driver as a module, choose M here.
>
> +config PHY_HI3660_USB
> + tristate "hi3660 USB PHY support"
> + depends on (ARCH_HISI && ARM64) || COMPILE_TEST
> + select GENERIC_PHY
> + select MFD_SYSCON
> + help
> + Enable this to support the HISILICON HI3660 USB PHY.
> +
> + To compile this driver as a module, choose M here.
> +
> config PHY_HISTB_COMBPHY
> tristate "HiSilicon STB SoCs COMBPHY support"
> depends on (ARCH_HISI && ARM64) || COMPILE_TEST
> diff --git a/drivers/phy/hisilicon/Makefile b/drivers/phy/hisilicon/Makefile
> index f662a4fe18d8..75ba64e2faf8 100644
> --- a/drivers/phy/hisilicon/Makefile
> +++ b/drivers/phy/hisilicon/Makefile
> @@ -1,4 +1,5 @@
> obj-$(CONFIG_PHY_HI6220_USB) += phy-hi6220-usb.o
> +obj-$(CONFIG_PHY_HI3660_USB) += phy-hi3660-usb3.o
> obj-$(CONFIG_PHY_HISTB_COMBPHY) += phy-histb-combphy.o
> obj-$(CONFIG_PHY_HISI_INNO_USB2) += phy-hisi-inno-usb2.o
> obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o
> diff --git a/drivers/phy/hisilicon/phy-hi3660-usb3.c b/drivers/phy/hisilicon/phy-hi3660-usb3.c
> new file mode 100644
> index 000000000000..cc0af2c044d0
> --- /dev/null
> +++ b/drivers/phy/hisilicon/phy-hi3660-usb3.c
> @@ -0,0 +1,233 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Phy provider for USB 3.0 controller on HiSilicon 3660 platform
> + *
> + * Copyright (C) 2017-2018 Hilisicon Electronics Co., Ltd.
> + * http://www.huawei.com
> + *
> + * Authors: Yu Chen <chenyu56@huawei.com>
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +
> +#define PERI_CRG_CLK_EN4 0x40
> +#define PERI_CRG_CLK_DIS4 0x44
> +#define GT_CLK_USB3OTG_REF BIT(0)
> +#define GT_ACLK_USB3OTG BIT(1)
> +
> +#define PERI_CRG_RSTEN4 0x90
> +#define PERI_CRG_RSTDIS4 0x94
> +#define IP_RST_USB3OTGPHY_POR BIT(3)
> +#define IP_RST_USB3OTG BIT(5)
> +
> +#define PERI_CRG_ISODIS 0x148
> +#define USB_REFCLK_ISO_EN BIT(25)
> +
> +#define PCTRL_PERI_CTRL3 0x10
> +#define PCTRL_PERI_CTRL3_MSK_START 16
> +#define USB_TCXO_EN BIT(1)
> +
> +#define PCTRL_PERI_CTRL24 0x64
> +#define SC_CLK_USB3PHY_3MUX1_SEL BIT(25)
> +
> +#define USBOTG3_CTRL0 0x00
> +#define SC_USB3PHY_ABB_GT_EN BIT(15)
> +
> +#define USBOTG3_CTRL2 0x08
> +#define USBOTG3CTRL2_POWERDOWN_HSP BIT(0)
> +#define USBOTG3CTRL2_POWERDOWN_SSP BIT(1)
> +
> +#define USBOTG3_CTRL3 0x0C
> +#define USBOTG3_CTRL3_VBUSVLDEXT BIT(6)
> +#define USBOTG3_CTRL3_VBUSVLDEXTSEL BIT(5)
> +
> +#define USBOTG3_CTRL4 0x10
> +
> +#define USBOTG3_CTRL7 0x1c
> +#define REF_SSP_EN BIT(16)
> +
> +/* This value config the default txtune parameter of the usb 2.0 phy */
> +#define HI3660_USB_DEFAULT_PHY_PARAM 0x1c466e3
> +
> +struct hi3660_priv {
> + struct device *dev;
> + struct regmap *peri_crg;
> + struct regmap *pctrl;
> + struct regmap *otg_bc;
> + u32 eye_diagram_param;
> +};
> +
> +static int hi3660_phy_init(struct phy *phy)
> +{
> + struct hi3660_priv *priv = phy_get_drvdata(phy);
> + u32 val, mask;
> + int ret;
> +
> + /* usb refclk iso disable */
> + ret = regmap_write(priv->peri_crg, PERI_CRG_ISODIS, USB_REFCLK_ISO_EN);
> + if (ret)
> + goto out;
> +
> + /* enable usb_tcxo_en */
> + val = USB_TCXO_EN | (USB_TCXO_EN << PCTRL_PERI_CTRL3_MSK_START);
> + ret = regmap_write(priv->pctrl, PCTRL_PERI_CTRL3, val);
> + if (ret)
> + goto out;
> +
> + /* assert phy */
> + val = IP_RST_USB3OTGPHY_POR | IP_RST_USB3OTG;
> + ret = regmap_write(priv->peri_crg, PERI_CRG_RSTEN4, val);
> + if (ret)
> + goto out;
> +
> + /* enable phy ref clk */
> + val = SC_USB3PHY_ABB_GT_EN;
> + mask = val;
> + ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL0, mask, val);
> + if (ret)
> + goto out;
> +
> + val = REF_SSP_EN;
> + mask = val;
> + ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL7, mask, val);
> + if (ret)
> + goto out;
> +
> + /* exit from IDDQ mode */
> + mask = USBOTG3CTRL2_POWERDOWN_HSP | USBOTG3CTRL2_POWERDOWN_SSP;
> + ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL2, mask, 0);
> + if (ret)
> + goto out;
> +
> + /* delay for exit from IDDQ mode */
> + usleep_range(100, 120);
> +
> + /* deassert phy */
> + val = IP_RST_USB3OTGPHY_POR | IP_RST_USB3OTG;
> + ret = regmap_write(priv->peri_crg, PERI_CRG_RSTDIS4, val);
> + if (ret)
> + goto out;
> +
> + /* delay for phy deasserted */
> + usleep_range(10000, 15000);
> +
> + /* fake vbus valid signal */
> + val = USBOTG3_CTRL3_VBUSVLDEXT | USBOTG3_CTRL3_VBUSVLDEXTSEL;
> + mask = val;
> + ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL3, mask, val);
> + if (ret)
> + goto out;
> +
> + /* delay for vbus valid */
> + usleep_range(100, 120);
> +
> + ret = regmap_write(priv->otg_bc, USBOTG3_CTRL4,
> + priv->eye_diagram_param);
> + if (ret)
> + goto out;
> +
> + return 0;
> +out:
> + dev_err(priv->dev, "failed to init phy ret: %d\n", ret);
> + return ret;
> +}
> +
> +static int hi3660_phy_exit(struct phy *phy)
> +{
> + struct hi3660_priv *priv = phy_get_drvdata(phy);
> + u32 val;
> + int ret;
> +
> + /* assert phy */
> + val = IP_RST_USB3OTGPHY_POR;
> + ret = regmap_write(priv->peri_crg, PERI_CRG_RSTEN4, val);
> + if (ret)
> + goto out;
> +
> + /* disable usb_tcxo_en */
> + val = USB_TCXO_EN << PCTRL_PERI_CTRL3_MSK_START;
> + ret = regmap_write(priv->pctrl, PCTRL_PERI_CTRL3, val);
> + if (ret)
> + goto out;
> +
> + return 0;
> +out:
> + dev_err(priv->dev, "failed to exit phy ret: %d\n", ret);
> + return ret;
> +}
> +
> +static struct phy_ops hi3660_phy_ops = {
> + .init = hi3660_phy_init,
> + .exit = hi3660_phy_exit,
> + .owner = THIS_MODULE,
> +};
> +
> +static int hi3660_phy_probe(struct platform_device *pdev)
> +{
> + struct phy_provider *phy_provider;
> + struct device *dev = &pdev->dev;
> + struct phy *phy;
> + struct hi3660_priv *priv;
> +
> + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + priv->dev = dev;
> + priv->peri_crg = syscon_regmap_lookup_by_phandle(dev->of_node,
> + "hisilicon,pericrg-syscon");
> + if (IS_ERR(priv->peri_crg)) {
> + dev_err(dev, "no hisilicon,pericrg-syscon\n");
> + return PTR_ERR(priv->peri_crg);
> + }
> +
> + priv->pctrl = syscon_regmap_lookup_by_phandle(dev->of_node,
> + "hisilicon,pctrl-syscon");
> + if (IS_ERR(priv->pctrl)) {
> + dev_err(dev, "no hisilicon,pctrl-syscon\n");
> + return PTR_ERR(priv->pctrl);
> + }
> +
> + /* node of hi3660 phy is a sub-node of usb3_otg_bc */
> + priv->otg_bc = syscon_node_to_regmap(dev->parent->of_node);
> + if (IS_ERR(priv->otg_bc)) {
> + dev_err(dev, "no hisilicon,usb3-otg-bc-syscon\n");
> + return PTR_ERR(priv->otg_bc);
> + }
> +
> + if (of_property_read_u32(dev->of_node, "hisilicon,eye-diagram-param",
> + &(priv->eye_diagram_param)))
> + priv->eye_diagram_param = HI3660_USB_DEFAULT_PHY_PARAM;
> +
> + phy = devm_phy_create(dev, NULL, &hi3660_phy_ops);
> + if (IS_ERR(phy))
> + return PTR_ERR(phy);
> +
> + phy_set_drvdata(phy, priv);
> + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> + return PTR_ERR_OR_ZERO(phy_provider);
> +}
> +
> +static const struct of_device_id hi3660_phy_of_match[] = {
> + {.compatible = "hisilicon,hi3660-usb-phy",},
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, hi3660_phy_of_match);
> +
> +static struct platform_driver hi3660_phy_driver = {
> + .probe = hi3660_phy_probe,
> + .driver = {
> + .name = "hi3660-usb-phy",
> + .of_match_table = hi3660_phy_of_match,
> + }
> +};
> +module_platform_driver(hi3660_phy_driver);
> +
> +MODULE_AUTHOR("Yu Chen <chenyu56@huawei.com>");
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("Hilisicon Hi3660 USB3 PHY Driver");
>

\
 
 \ /
  Last update: 2019-04-17 08:45    [W:0.047 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site