lkml.org 
[lkml]   [2019]   [Apr]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH v6 10/12] soc: ti: Add MSI domain bus support for Interrupt Aggregator
From
Date
On 10/04/2019 05:13, Lokesh Vutla wrote:
> With the system coprocessor managing the range allocation of the
> inputs to Interrupt Aggregator, it is difficult to represent
> the device IRQs from DT.
>
> The suggestion is to use MSI in such cases where devices wants
> to allocate and group interrupts dynamically.
>
> Create a MSI domain bus layer that allocates and frees MSIs for
> a device.
>
> APIs that are implemented:
> - ti_sci_inta_msi_create_irq_domain() that creates a MSI domain
> - ti_sci_inta_msi_domain_alloc_irqs() that creates MSIs for the
> specified device and resource.
> - ti_sci_inta_msi_domain_free_irqs() frees the irqs attached to the device.
> - ti_sci_inta_msi_get_virq() for getting the virq attached to a specific event.
>
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
> ---
> Changes since v5:
> - Updated the input parametes to all apis
> - Updated the default chip ops.
> - Prefixed all the apis with ti_sci_inta_
>
> Marc,
> Right now ti_sci_resource is being passed for irq allocatons.
> I couldn't get to use resources attached to platform_device. Because
> platform_device resources are allocated in of_device_alloc() and number
> of resources are fixed in it. In order to update the resources, driver
> has to do a krealloc(pdev->resources) and update the num of resources.
> Is it allowed to update the pdev->resources during probe time? If yes,
> Ill be happy to update the patch to use platform_dev resources.

My suggestion was for you to define your own bus, device type and co
(much like the fsl-mc stuff), and not reuse platform devices at all.

>
>
> MAINTAINERS | 2 +
> drivers/soc/ti/Kconfig | 6 +
> drivers/soc/ti/Makefile | 1 +
> drivers/soc/ti/ti_sci_inta_msi.c | 167 +++++++++++++++++++++++++
> include/linux/irqdomain.h | 1 +
> include/linux/msi.h | 6 +
> include/linux/soc/ti/ti_sci_inta_msi.h | 23 ++++
> 7 files changed, 206 insertions(+)
> create mode 100644 drivers/soc/ti/ti_sci_inta_msi.c
> create mode 100644 include/linux/soc/ti/ti_sci_inta_msi.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index ba88b3033fe4..dd31d7cb2fc6 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -15353,6 +15353,8 @@ F: Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt
> F: Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.txt
> F: drivers/irqchip/irq-ti-sci-intr.c
> F: drivers/irqchip/irq-ti-sci-inta.c
> +F: include/linux/soc/ti/ti_sci_inta_msi.h
> +F: drivers/soc/ti/ti_sci_inta_msi.c
>
> Texas Instruments ASoC drivers
> M: Peter Ujfalusi <peter.ujfalusi@ti.com>
> diff --git a/drivers/soc/ti/Kconfig b/drivers/soc/ti/Kconfig
> index be4570baad96..82f110fe4953 100644
> --- a/drivers/soc/ti/Kconfig
> +++ b/drivers/soc/ti/Kconfig
> @@ -73,4 +73,10 @@ config TI_SCI_PM_DOMAINS
> called ti_sci_pm_domains. Note this is needed early in boot before
> rootfs may be available.
>
> +config TI_SCI_INTA_MSI_DOMAIN
> + bool
> + select GENERIC_MSI_IRQ_DOMAIN
> + help
> + Driver to enable Interrupt Aggregator specific MSI Domain.
> +
> endif # SOC_TI
> diff --git a/drivers/soc/ti/Makefile b/drivers/soc/ti/Makefile
> index a22edc0b258a..b3868d392d4f 100644
> --- a/drivers/soc/ti/Makefile
> +++ b/drivers/soc/ti/Makefile
> @@ -8,3 +8,4 @@ obj-$(CONFIG_KEYSTONE_NAVIGATOR_DMA) += knav_dma.o
> obj-$(CONFIG_AMX3_PM) += pm33xx.o
> obj-$(CONFIG_WKUP_M3_IPC) += wkup_m3_ipc.o
> obj-$(CONFIG_TI_SCI_PM_DOMAINS) += ti_sci_pm_domains.o
> +obj-$(CONFIG_TI_SCI_INTA_MSI_DOMAIN) += ti_sci_inta_msi.o
> diff --git a/drivers/soc/ti/ti_sci_inta_msi.c b/drivers/soc/ti/ti_sci_inta_msi.c
> new file mode 100644
> index 000000000000..247a5e5f216b
> --- /dev/null
> +++ b/drivers/soc/ti/ti_sci_inta_msi.c
> @@ -0,0 +1,167 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Texas Instruments' K3 Interrupt Aggregator MSI bus
> + *
> + * Copyright (C) 2018-2019 Texas Instruments Incorporated - http://www.ti.com/
> + * Lokesh Vutla <lokeshvutla@ti.com>
> + */
> +
> +#include <linux/of_device.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/irq.h>
> +#include <linux/irqdomain.h>
> +#include <linux/msi.h>

Alphabetical ordering, please.

> +#include <linux/soc/ti/ti_sci_inta_msi.h>
> +#include <linux/soc/ti/ti_sci_protocol.h>
> +
> +static void ti_sci_inta_msi_write_msg(struct irq_data *data,
> + struct msi_msg *msg)
> +{
> + /* Nothing to do */
> +}
> +
> +static void ti_sci_inta_msi_compose_msi_msg(struct irq_data *data,
> + struct msi_msg *msg)
> +{
> + /* Nothing to do */
> +}
> +
> +static int ti_sci_inta_msi_request_resources(struct irq_data *data)
> +{
> + data = data->parent_data;
> +
> + return data->chip->irq_request_resources(data);
> +}
> +
> +static void ti_sci_inta_msi_release_resources(struct irq_data *data)
> +{
> + data = data->parent_data;
> + data->chip->irq_release_resources(data);
> +}

The two functions above are an implementation of
irq_chip_{request,release}_resource_parent(). Please make them generic
functions, use them and fix drivers/gpio/gpio-thunderx.c to use them too.

> +
> +static void ti_sci_inta_msi_update_chip_ops(struct msi_domain_info *info)
> +{
> + struct irq_chip *chip = info->chip;
> +
> + WARN_ON(!chip);

Just doing that isn't going to help, as you'll crash on the following
line...

> + if (!chip->irq_mask)
> + chip->irq_mask = irq_chip_mask_parent;
> + if (!chip->irq_unmask)
> + chip->irq_unmask = irq_chip_unmask_parent;
> + if (!chip->irq_ack)
> + chip->irq_ack = irq_chip_ack_parent;
> + if (!chip->irq_set_type)
> + chip->irq_set_type = irq_chip_set_type_parent;
> + if (!chip->irq_write_msi_msg)
> + chip->irq_write_msi_msg = ti_sci_inta_msi_write_msg;
> + if (!chip->irq_compose_msi_msg)
> + chip->irq_compose_msi_msg = ti_sci_inta_msi_compose_msi_msg;
> + if (!chip->irq_request_resources)
> + chip->irq_request_resources = ti_sci_inta_msi_request_resources;
> + if (!chip->irq_release_resources)
> + chip->irq_release_resources = ti_sci_inta_msi_release_resources;

Is there any case where a client driver wouldn't use the default all the
time?

> +}
> +
> +struct irq_domain
> +*ti_sci_inta_msi_create_irq_domain(struct fwnode_handle *fwnode,
> + struct msi_domain_info *info,
> + struct irq_domain *parent)
> +{
> + struct irq_domain *domain;
> +
> + if (info->flags & MSI_FLAG_USE_DEF_CHIP_OPS)
> + ti_sci_inta_msi_update_chip_ops(info);

If the answer above is "no", then you can happily ignore this flag and
always populate the callbacks.

> +
> + domain = msi_create_irq_domain(fwnode, info, parent);
> + if (domain)
> + irq_domain_update_bus_token(domain, DOMAIN_BUS_TI_SCI_INTA_MSI);
> +
> + return domain;
> +}
> +EXPORT_SYMBOL_GPL(ti_sci_inta_msi_create_irq_domain);
> +
> +static void ti_sci_inta_msi_free_descs(struct device *dev)
> +{
> + struct msi_desc *desc, *tmp;
> +
> + list_for_each_entry_safe(desc, tmp, dev_to_msi_list(dev), list) {
> + list_del(&desc->list);
> + free_msi_entry(desc);
> + }
> +}
> +
> +static int ti_sci_inta_msi_alloc_descs(struct device *dev, u32 dev_id,
> + struct ti_sci_resource *res)
> +{
> + struct msi_desc *msi_desc;
> + int set, i, count = 0;
> +
> + for (set = 0; set < res->sets; set++) {
> + for (i = 0; i < res->desc[set].num; i++) {
> + msi_desc = alloc_msi_entry(dev, 1, NULL);
> + if (!msi_desc) {
> + ti_sci_inta_msi_free_descs(dev);
> + return -ENOMEM;
> + }
> +
> + msi_desc->inta.index = res->desc[set].start + i;
> + msi_desc->inta.dev_id = dev_id;

I'm highly suspiscious of this. See further down.

> + INIT_LIST_HEAD(&msi_desc->list);
> + list_add_tail(&msi_desc->list, dev_to_msi_list(dev));
> + count++;
> + }
> + }
> +
> + return count;
> +}
> +
> +int ti_sci_inta_msi_domain_alloc_irqs(struct platform_device *pdev,
> + struct ti_sci_resource *res)
> +{
> + struct irq_domain *msi_domain;
> + int ret, nvec;
> +
> + msi_domain = dev_get_msi_domain(&pdev->dev);
> + if (!msi_domain)
> + return -EINVAL;
> +
> + if (pdev->id < 0)
> + return -ENODEV;
> +
> + nvec = ti_sci_inta_msi_alloc_descs(&pdev->dev, pdev->id, res);
> + if (nvec <= 0)
> + return nvec;
> +
> + ret = msi_domain_alloc_irqs(msi_domain, &pdev->dev, nvec);
> + if (ret) {
> + dev_err(&pdev->dev, "Failed to allocate IRQs %d\n", ret);
> + goto cleanup;
> + }
> +
> + return 0;
> +
> +cleanup:
> + ti_sci_inta_msi_free_descs(&pdev->dev);
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(ti_sci_inta_msi_domain_alloc_irqs);
> +
> +void ti_sci_inta_msi_domain_free_irqs(struct device *dev)
> +{
> + msi_domain_free_irqs(dev->msi_domain, dev);
> + ti_sci_inta_msi_free_descs(dev);
> +}
> +EXPORT_SYMBOL_GPL(ti_sci_inta_msi_domain_free_irqs);
> +
> +unsigned int ti_sci_inta_msi_get_virq(struct platform_device *pdev, u32 index)
> +{
> + struct msi_desc *desc;
> +
> + for_each_msi_entry(desc, &pdev->dev)
> + if (desc->inta.index == index && desc->inta.dev_id == pdev->id)

What is this "index"? Why isn't the right entry the index-th element in
the msi_desc list? Worse, the dev_id check. The whole point of having a
per-device MSI list is that it is, well, per device.

> + return desc->irq;
> +
> + return -ENODEV;
> +}
> +EXPORT_SYMBOL_GPL(ti_sci_inta_msi_get_virq);
> diff --git a/include/linux/irqdomain.h b/include/linux/irqdomain.h
> index 61706b430907..07ec8b390161 100644
> --- a/include/linux/irqdomain.h
> +++ b/include/linux/irqdomain.h
> @@ -82,6 +82,7 @@ enum irq_domain_bus_token {
> DOMAIN_BUS_NEXUS,
> DOMAIN_BUS_IPI,
> DOMAIN_BUS_FSL_MC_MSI,
> + DOMAIN_BUS_TI_SCI_INTA_MSI,
> };
>
> /**
> diff --git a/include/linux/msi.h b/include/linux/msi.h
> index 7e9b81c3b50d..7e12dfc4cb39 100644
> --- a/include/linux/msi.h
> +++ b/include/linux/msi.h
> @@ -47,6 +47,11 @@ struct fsl_mc_msi_desc {
> u16 msi_index;
> };
>
> +struct ti_sci_inta_msi_desc {
> + u16 dev_id;
> + u16 index;
> +};
> +
> /**
> * struct msi_desc - Descriptor structure for MSI based interrupts
> * @list: List head for management
> @@ -106,6 +111,7 @@ struct msi_desc {
> */
> struct platform_msi_desc platform;
> struct fsl_mc_msi_desc fsl_mc;
> + struct ti_sci_inta_msi_desc inta;
> };
> };
>
> diff --git a/include/linux/soc/ti/ti_sci_inta_msi.h b/include/linux/soc/ti/ti_sci_inta_msi.h
> new file mode 100644
> index 000000000000..b0ca20ab3f49
> --- /dev/null
> +++ b/include/linux/soc/ti/ti_sci_inta_msi.h
> @@ -0,0 +1,23 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Texas Instruments' K3 TI SCI INTA MSI helper
> + *
> + * Copyright (C) 2018-2019 Texas Instruments Incorporated - http://www.ti.com/
> + * Lokesh Vutla <lokeshvutla@ti.com>
> + */
> +
> +#ifndef __INCLUDE_LINUX_TI_SCI_INTA_MSI_H
> +#define __INCLUDE_LINUX_TI_SCI_INTA_MSI_H
> +
> +#include <linux/msi.h>
> +#include <linux/soc/ti/ti_sci_protocol.h>
> +
> +struct irq_domain
> +*ti_sci_inta_msi_create_irq_domain(struct fwnode_handle *fwnode,
> + struct msi_domain_info *info,
> + struct irq_domain *parent);
> +int ti_sci_inta_msi_domain_alloc_irqs(struct platform_device *pdev,
> + struct ti_sci_resource *res);
> +unsigned int ti_sci_inta_msi_get_virq(struct platform_device *dev, u32 index);
> +void ti_sci_inta_msi_domain_free_irqs(struct device *dev);
> +#endif /* __INCLUDE_LINUX_IRQCHIP_TI_SCI_INTA_H */

Thanks,

M.
--
Jazz is not dead. It just smells funny...

\
 
 \ /
  Last update: 2019-04-17 18:35    [W:0.142 / U:1.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site