lkml.org 
[lkml]   [2019]   [Apr]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v5 0/5] ARM: da850: enable cpufreq in DT mode
Date
From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

This series adds cpufreq-dt operating points for da850 boards supported
with device tree (da850-lcdk, da850-lego-ev3, da850-evm).

Last patch enables CPUFREQ_DT in davinci_all_defconfig.

v1 -> v2:
- use the VDCDC3_1.2V regulator as cpu-supply on da850-evm

v2 -> v3:
- drop patch 1, as the revision tag is in fact correctly passed to the kernel
by u-boot
- only enable the 375 operating point for da850-evm as this is the standard
frequency for this board

v3 -> v4:
- split the first patch into three separate changesets: one adding the
operating points to the main dtsi and two enabling cpufreq on da850-lego-ev3
and da850-lcdk
- remove the operating point not mentioned in the datasheet (415 MHz)
- fix commit message in patch 4/5

v4 -> v5:
- only enable a single OPP for da850-lcdk due to the problem with the OHCI
controller becoming unresponsive after cpufreq transitions
- fix the name of the pmic on da850-evm

Bartosz Golaszewski (1):
ARM: dts: da850-evm: enable cpufreq

David Lechner (4):
ARM: dts: da850: add cpu node and operating points to DT
ARM: dts: da850-lego-ev3: enable cpufreq
ARM: dts: da850-lcdk: enable cpufreq
ARM: davinci_all_defconfig: Enable CPUFREQ_DT

arch/arm/boot/dts/da850-evm.dts | 13 +++++++
arch/arm/boot/dts/da850-lcdk.dts | 36 +++++++++++++++++++
arch/arm/boot/dts/da850-lego-ev3.dts | 30 ++++++++++++++++
arch/arm/boot/dts/da850.dtsi | 50 ++++++++++++++++++++++++++
arch/arm/configs/davinci_all_defconfig | 1 +
5 files changed, 130 insertions(+)

--
2.21.0

\
 
 \ /
  Last update: 2019-04-17 17:28    [W:0.079 / U:0.544 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site