lkml.org 
[lkml]   [2019]   [Apr]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 10/12] thermal: qoriq: Do not report invalid temperature reading
From
Date
On 13/04/2019 10:27, Andrey Smirnov wrote:
> Before returning measured temperature data to upper layer we need to
> make sure that the reading was marked as "valid" to avoid reporting
> bogus data.
>
> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
> Cc: Chris Healy <cphealy@gmail.com>
> Cc: Lucas Stach <l.stach@pengutronix.de>
> Cc: Eduardo Valentin <edubezval@gmail.com>
> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
> Cc: Angus Ainslie (Purism) <angus@akkea.ca>
> Cc: linux-imx@nxp.com
> Cc: linux-pm@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> ---

Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>


> drivers/thermal/qoriq_thermal.c | 20 ++++++++++++++++++--
> 1 file changed, 18 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c
> index abbbfe88422e..5c459a9d0db3 100644
> --- a/drivers/thermal/qoriq_thermal.c
> +++ b/drivers/thermal/qoriq_thermal.c
> @@ -37,6 +37,7 @@
> #define REGS_TRITSR(n) (0x100 + 16 * (n)) /* Immediate Temperature
> * Site Register
> */
> +#define TRITSR_V BIT(31)
> #define REGS_TTRnCR(n) (0xf10 + 4 * (n)) /* Temperature Range n
> * Control Register
> */
> @@ -48,10 +49,25 @@ static int tmu_get_temp(int id, void *p, int *temp)
> {
> struct qoriq_tmu_data *qdata = p;
> u32 val;
> + /*
> + * REGS_TRITSR(id) has the following layout:
> + *
> + * 31 ... 7 6 5 4 3 2 1 0
> + * V TEMP
> + *
> + * Where V bit signifies if the measurement is ready and is
> + * within sensor range. TEMP is an 8 bit value representing
> + * temperature in C.
> + */
> + if (regmap_read_poll_timeout(qdata->regmap,
> + REGS_TRITSR(id),
> + val,
> + val & TRITSR_V,
> + USEC_PER_MSEC,
> + 10 * USEC_PER_MSEC))
> + return -ENODATA;
>
> - regmap_read(qdata->regmap, REGS_TRITSR(id), &val);
> *temp = (val & 0xff) * 1000;
> -
> return 0;
> }
>
>


--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

\
 
 \ /
  Last update: 2019-04-16 19:11    [W:0.112 / U:0.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site