lkml.org 
[lkml]   [2019]   [Apr]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 0/2] Add support for the Purism Librem5 devkit
Date
From
On 2019-04-16 00:58, Marco Felsch wrote:
> Hi Agnus,
>
> On 19-04-15 16:53, Angus Ainslie (Purism) wrote:
>> The Librem5 devkit is based on the imx8mq from NXP. This is a default
>> devicetree to boot the board to a command prompt.
>
> You should also provide a patch which adds the devicetree to the yaml
> file, see: Documentation/devicetree/bindings/arm/fsl.yaml.
>

Sure, what is that yaml file for ?

Angus

> Thanks,
> Marco
>
>>
>> Changes since v3:
>>
>> Freshly sorted and pressed nodes.
>> Change the backlight to an interpolated scale.
>> Dropped i2c2.
>> Dropped devkit version number to match debian MR.
>>
>> Changes since v2:
>>
>> Fixed incorrect phy-supply for the fsl-fec.
>> Dropped unused regulator property.
>> Fixup Makefile for linux-next.
>>
>> Changes since v1:
>>
>> Dropped config file.
>> Updated the board compatible label.
>> Changed node names to follow naming conventions.
>> Added a more complete regulator hierachy.
>> Removed unused nodes.
>> Removed unknown devices.
>> Fixed comment style.
>> Dropped undocumented properties.
>>
>> Angus Ainslie (Purism) (2):
>> arm64: dts: fsl: librem5: Add a device tree for the Librem5 devkit
>> dt-bindings: Add an entry for Purism SPC
>>
>> .../devicetree/bindings/vendor-prefixes.txt | 1 +
>> arch/arm64/boot/dts/freescale/Makefile | 1 +
>> .../dts/freescale/imx8mq-librem5-devkit.dts | 822
>> ++++++++++++++++++
>> 3 files changed, 824 insertions(+)
>> create mode 100644
>> arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
>>
>> --
>> 2.17.1
>>
>>
>>

\
 
 \ /
  Last update: 2019-04-16 18:39    [W:0.120 / U:0.548 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site