lkml.org 
[lkml]   [2019]   [Apr]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v2 3/6] x86/MCE/AMD: Don't cache block addresses on SMCA systems
On Thu, Apr 11, 2019 at 08:18:02PM +0000, Ghannam, Yazen wrote:
> From: Yazen Ghannam <yazen.ghannam@amd.com>
>
> On legacy systems, the addresses of the MCA_MISC* registers need to be
> recursively discovered based on a Block Pointer field in the registers.
>
> On Scalable MCA systems, the register space is fixed, and particular
> addresses can be derived by regular offsets for bank and register type.
> This fixed address space includes the MCA_MISC* registers.
>
> MCA_MISC0 is always available for each MCA bank. MCA_MISC1 through
> MCA_MISC4 are considered available if MCA_MISC0[BlkPtr]=1.
>
> Cache the value of MCA_MISC0[BlkPtr] for each bank and per CPU. This
> needs to be done only during init. The values should be saved per CPU
> to accommodate heterogeneous SMCA systems.
>
> Redo smca_get_block_address() to directly return the block addresses.
> Use the cached Block Pointer value to decide if the MCA_MISC1-4
> addresses should be returned.
>
> Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
> ---
> Link:
> https://lkml.kernel.org/r/20190408141205.12376-4-Yazen.Ghannam@amd.com
>
> v1->v2:
> * No change.
>
> arch/x86/kernel/cpu/mce/amd.c | 71 +++++++++++++++++------------------
> 1 file changed, 35 insertions(+), 36 deletions(-)
>
> diff --git a/arch/x86/kernel/cpu/mce/amd.c b/arch/x86/kernel/cpu/mce/amd.c
> index e64de5149e50..f0644b59848d 100644
> --- a/arch/x86/kernel/cpu/mce/amd.c
> +++ b/arch/x86/kernel/cpu/mce/amd.c
> @@ -101,11 +101,6 @@ static struct smca_bank_name smca_names[] = {
> [SMCA_PCIE] = { "pcie", "PCI Express Unit" },
> };
>
> -static u32 smca_bank_addrs[MAX_NR_BANKS][NR_BLOCKS] __ro_after_init =
> -{
> - [0 ... MAX_NR_BANKS - 1] = { [0 ... NR_BLOCKS - 1] = -1 }
> -};
> -
> static const char *smca_get_name(enum smca_bank_types t)
> {
> if (t >= N_SMCA_BANK_TYPES)
> @@ -198,6 +193,7 @@ static char buf_mcatype[MAX_MCATYPE_NAME_LEN];
>
> static DEFINE_PER_CPU(struct threshold_bank **, threshold_banks);
> static DEFINE_PER_CPU(unsigned int, bank_map); /* see which banks are on */
> +static DEFINE_PER_CPU(u32, smca_blkptr_map); /* see which banks use BlkPtr */

smca_misc_banks_map I guess. BlkPtr means something only to you, PPR
writers and me. And a couple others... :-)

> static void amd_threshold_interrupt(void);
> static void amd_deferred_error_interrupt(void);
> @@ -208,6 +204,28 @@ static void default_deferred_error_interrupt(void)
> }
> void (*deferred_error_int_vector)(void) = default_deferred_error_interrupt;
>
> +static void smca_set_blkptr_map(unsigned int bank, unsigned int cpu)

Accordingly...

> +{
> + u32 low, high;
> +
> + /*
> + * For SMCA enabled processors, BLKPTR field of the first MISC register
> + * (MCx_MISC0) indicates presence of additional MISC regs set (MISC1-4).
> + */
> + if (rdmsr_safe(MSR_AMD64_SMCA_MCx_CONFIG(bank), &low, &high))
> + return;
> +
> + if (!(low & MCI_CONFIG_MCAX))
> + return;
> +
> + if (rdmsr_safe(MSR_AMD64_SMCA_MCx_MISC(bank), &low, &high))
> + return;
> +
> + if (low & MASK_BLKPTR_LO)
> + per_cpu(smca_blkptr_map, cpu) |= 1 << bank;

BIT(bank)

> +
> +}
> +
> static void smca_configure(unsigned int bank, unsigned int cpu)
> {
> unsigned int i, hwid_mcatype;
> @@ -245,6 +263,8 @@ static void smca_configure(unsigned int bank, unsigned int cpu)
> wrmsr(smca_config, low, high);
> }
>
> + smca_set_blkptr_map(bank, cpu);
> +
> /* Return early if this bank was already initialized. */
> if (smca_banks[bank].hwid)
> return;
> @@ -455,42 +475,21 @@ static void deferred_error_interrupt_enable(struct cpuinfo_x86 *c)
> wrmsr(MSR_CU_DEF_ERR, low, high);
> }
>
> -static u32 smca_get_block_address(unsigned int bank, unsigned int block)
> +static u32 smca_get_block_address(unsigned int bank, unsigned int block,
> + unsigned int cpu)
> {
> - u32 low, high;
> - u32 addr = 0;
> -
> - if (smca_get_bank_type(bank) == SMCA_RESERVED)
> - return addr;
> -
> if (!block)
> return MSR_AMD64_SMCA_MCx_MISC(bank);
>
> - /* Check our cache first: */
> - if (smca_bank_addrs[bank][block] != -1)
> - return smca_bank_addrs[bank][block];
> -
> - /*
> - * For SMCA enabled processors, BLKPTR field of the first MISC register
> - * (MCx_MISC0) indicates presence of additional MISC regs set (MISC1-4).
> - */
> - if (rdmsr_safe(MSR_AMD64_SMCA_MCx_CONFIG(bank), &low, &high))
> - goto out;
> -
> - if (!(low & MCI_CONFIG_MCAX))
> - goto out;
> -
> - if (!rdmsr_safe(MSR_AMD64_SMCA_MCx_MISC(bank), &low, &high) &&
> - (low & MASK_BLKPTR_LO))
> - addr = MSR_AMD64_SMCA_MCx_MISCy(bank, block - 1);
> + if (!(per_cpu(smca_blkptr_map, cpu) & (1 << bank)))

BIT(bank)

> + return 0;
>
> -out:
> - smca_bank_addrs[bank][block] = addr;
> - return addr;
> + return MSR_AMD64_SMCA_MCx_MISCy(bank, block - 1);
> }

--
Regards/Gruss,
Boris.

Good mailing practices for 400: avoid top-posting and trim the reply.

\
 
 \ /
  Last update: 2019-04-16 15:44    [W:0.086 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site