lkml.org 
[lkml]   [2019]   [Apr]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [v2,1/2] drm: Add writeback_w,h properties
On Tue, Apr 16, 2019 at 11:17 AM Liviu Dudau <Liviu.Dudau@arm.com> wrote:
>
> On Tue, Apr 16, 2019 at 09:34:20AM +0200, Daniel Vetter wrote:
> > On Mon, Apr 15, 2019 at 10:20:45AM +0100, Liviu Dudau wrote:
> > > On Mon, Apr 15, 2019 at 08:59:30AM +0100, james qian wang (Arm Technology China) wrote:
> > > > On Fri, Apr 12, 2019 at 02:08:28PM +0000, Ben Davis wrote:
> > > > > Add new properties to specify width and height for writeback.
> > > > >
> > > > > Signed-off-by: Ben Davis <ben.davis@arm.com>
> > > > > ---
> > > > > drivers/gpu/drm/drm_atomic_uapi.c | 8 ++++++++
> > > > > drivers/gpu/drm/drm_writeback.c | 28 ++++++++++++++++++++++++++++
> > > > > include/drm/drm_connector.h | 4 ++++
> > > > > include/drm/drm_mode_config.h | 10 ++++++++++
> > > > > 4 files changed, 50 insertions(+)
> > > > >
> > > > > --
> > > > > 2.7.4
> > > > >
> > > > > diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c
> > > > > index d520a04..1f68dce 100644
> > > > > --- a/drivers/gpu/drm/drm_atomic_uapi.c
> > > > > +++ b/drivers/gpu/drm/drm_atomic_uapi.c
> > > > > @@ -765,6 +765,10 @@ static int drm_atomic_connector_set_property(struct drm_connector *connector,
> > > > > return -EINVAL;
> > > > > }
> > > > > state->content_protection = val;
> > > > > + } else if (property == config->prop_writeback_w) {
> > > > > + state->writeback_w = val;
> > > > > + } else if (property == config->prop_writeback_h) {
> > > > > + state->writeback_h = val;
> > > > > } else if (property == config->writeback_fb_id_property) {
> > > > > struct drm_framebuffer *fb = drm_framebuffer_lookup(dev, NULL, val);
> > > > > int ret = drm_atomic_set_writeback_fb_for_connector(state, fb);
> > > > > @@ -837,6 +841,10 @@ drm_atomic_connector_get_property(struct drm_connector *connector,
> > > > > *val = state->scaling_mode;
> > > > > } else if (property == connector->content_protection_property) {
> > > > > *val = state->content_protection;
> > > > > + } else if (property == config->prop_writeback_w) {
> > > > > + *val = state->writeback_w;
> > > > > + } else if (property == config->prop_writeback_h) {
> > > > > + *val = state->writeback_h;
> > > > > } else if (property == config->writeback_fb_id_property) {
> > > > > /* Writeback framebuffer is one-shot, write and forget */
> > > > > *val = 0;
> > > > > diff --git a/drivers/gpu/drm/drm_writeback.c b/drivers/gpu/drm/drm_writeback.c
> > > > > index c20e6fe..3d0453e 100644
> > > > > --- a/drivers/gpu/drm/drm_writeback.c
> > > > > +++ b/drivers/gpu/drm/drm_writeback.c
> > > > > @@ -74,6 +74,12 @@
> > > > > * applications making use of writeback connectors *always* retrieve an
> > > > > * out-fence for the commit and use it appropriately.
> > > > > * From userspace, this property will always read as zero.
> > > > > + *
> > > > > + * "WRITEBACK_W":
> > > > > + * The width of the writeback buffer to write back. 0 acts as default.
> > > > > + *
> > > > > + * "WRITEBACK_H":
> > > > > + * The height of the writeback buffer to write back. 0 acts as default.
> > > > > */
> > > > >
> > > > > #define fence_to_wb_connector(x) container_of(x->lock, \
> > > > > @@ -141,6 +147,22 @@ static int create_writeback_properties(struct drm_device *dev)
> > > > > dev->mode_config.writeback_out_fence_ptr_property = prop;
> > > > > }
> > > > >
> > > > > + if (!dev->mode_config.prop_writeback_w) {
> > > > > + prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC,
> > > > > + "WRITEBACK_W", 1, UINT_MAX);
> > > > > + if (!prop)
> > > > > + return -ENOMEM;
> > > > > + dev->mode_config.prop_writeback_w = prop;
> > > > > + }
> > > > > +
> > > > > + if (!dev->mode_config.prop_writeback_h) {
> > > > > + prop = drm_property_create_range(dev, DRM_MODE_PROP_ATOMIC,
> > > > > + "WRITEBACK_H", 1, UINT_MAX);
> > > > > + if (!prop)
> > > > > + return -ENOMEM;
> > > > > + dev->mode_config.prop_writeback_h = prop;
> > > > > + }
> > > > > +
> > > > > return 0;
> > > > > }
> > > > >
> > > > > @@ -225,6 +247,12 @@ int drm_writeback_connector_init(struct drm_device *dev,
> > > > > drm_object_attach_property(&connector->base,
> > > > > config->writeback_pixel_formats_property,
> > > > > blob->base.id);
> > > > > +
> > > > > + drm_object_attach_property(&connector->base,
> > > > > + config->prop_writeback_w, 0);
> > > > > + drm_object_attach_property(&connector->base,
> > > > > + config->prop_writeback_h, 0);
> > > >
> > > > Hi Ben:
> > > > Do we real need these two individual properties for specifing the writeback
> > > > w/h, can we use fb->w/h ?
> > > > And since these two properties are added as common and standard properties,
> > > > it influnce all existing write-back implementation which all assumed
> > > > writeback size as fb->w/h.
> > >
> > > The idea of having these additional properties was to maintain backwards
> > > compatibility (of some sort). If you don't set writeback_w/h then the
> > > assumption is that they are the same as fb->w/h, but I can see how it's
> > > going to be confusing to have fb->w/h different from crtc->w/h and
> > > different from writeback_w/h.
> >
> > Since we already have crtc_w/h independent of writeback_fb_w/h, do we need
> > another set of w/h? Are all the interactions between these tree
> > well-defined?
>
> No, we probably don't need another set of w/h values. As for the
> interaction, I propose the following:
>
> - writeback is only attached to a connector, so the crtc_x/y/w/h are the
> "input source" parameters into the writeback. Given that we put in the
> writeback the content of the CRTC, I suggest we ignore x,y (consider
> them to be always 0 for the writeback output).

There's no crtc_x/y. And what I meant with crtc_w/h is
crtc_state->mode->h/vdisplay. And you can already express scaling with
that, by setting the plane_state->crtc_x/y/h/w parameters as you wish.

> - writeback has a framebuffer attached, so we can use the fb->w/h to
> determine if we need to do any scaling of the output.

Hm, not sure we want that. You might want to automatically round
fb->w/h to whatever (ok right now we don't do that I think anywhere),
so forcing the output to match the fb->h/w doesn't make sense for me.
It's also inconsistent with how we treat fb attached to planes (where
we have the full set of src coordinates).

> > Atm I'm assuming that writeback is using crtc_w/h into the fb, at offset
> > 0, not scaled any further. But the planes themselves can be scaled into
> > the crtc_w/h window ofc.
>
> Our hardware has the ability to also write back one of the planes and
> scale it during writeback, but we have no way of expressing that in DRM
> via connectors, so we are going to ignore that case. The supported usecase
> is for the planes to be scaled into the "composition" area which is the size
> of the CRTC, and then writeback that to memory, possibly with scaling (we
> officially only going to support downscaling due to external dependencies
> on the memory clock that is needed for supporting upscaling).

Hm, see above, you can already express that:
- set crtc_state->mode->h/vdisplay to what you want the resulting
writeback image to be sized at.
- place the plane however you want using the plane properties within
that crtc window.

Cheers, Daniel

>
> Liviu
>
>
> >
> > Iirc the hw supporting writeback thus far needs a dedicated crtc for
> > writeback, so adding yet another scaling window is not needed?
> > -Daniel
> >
> > > > To compatible with existing writeback support, I suggest to keep to
> > > > use fb->w/h or add these properties as malidp private.
> > >
> > > We don't need to make them malidp private, there is nothing malidp
> > > specific in them. I'll talk with Ben, we should probably drop this patch
> > > entirely and just enable malidp scaling when fb->w/h differ from
> > > crtc->w/h.
> > >
> > > Best regards,
> > > Liviu
> > >
> > >
> > > >
> > > > Thanks
> > > > James
> > > >
> > > >
> > > > > wb_connector->pixel_formats_blob_ptr = blob;
> > > > >
> > > > > return 0;
> > > > > diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
> > > > > index 8fe22ab..51c4cb2 100644
> > > > > --- a/include/drm/drm_connector.h
> > > > > +++ b/include/drm/drm_connector.h
> > > > > @@ -515,6 +515,10 @@ struct drm_connector_state {
> > > > > */
> > > > > struct drm_writeback_job *writeback_job;
> > > > >
> > > > > + /** @writeback_w: width of plane to write to wb buffer */
> > > > > + /** @writeback_h: height of plane to write to wb buffer */
> > > > > + uint32_t writeback_w, writeback_h;
> > > > > +
> > > > > /**
> > > > > * @max_requested_bpc: Connector property to limit the maximum bit
> > > > > * depth of the pixels.
> > > > > diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
> > > > > index 7f60e8e..a0c2133 100644
> > > > > --- a/include/drm/drm_mode_config.h
> > > > > +++ b/include/drm/drm_mode_config.h
> > > > > @@ -622,6 +622,16 @@ struct drm_mode_config {
> > > > > */
> > > > > struct drm_property *prop_crtc_h;
> > > > > /**
> > > > > + * @prop_writeback_w: Writeback connector property for the plane
> > > > > + * destination position in the writeback buffer.
> > > > > + */
> > > > > + struct drm_property *prop_writeback_w;
> > > > > + /**
> > > > > + * @prop_writeback_h: Writeback connector property for the plane
> > > > > + * destination position in the writeback buffer.
> > > > > + */
> > > > > + struct drm_property *prop_writeback_h;
> > > > > + /**
> > > > > * @prop_fb_id: Default atomic plane property to specify the
> > > > > * &drm_framebuffer.
> > > > > */
> > > >
> > > > Pls del this window style line ending
> > > >
> > >
> > > --
> > > ====================
> > > | I would like to |
> > > | fix the world, |
> > > | but they're not |
> > > | giving me the |
> > > \ source code! /
> > > ---------------
> > > ¯\_(ツ)_/¯
> > > _______________________________________________
> > > dri-devel mailing list
> > > dri-devel@lists.freedesktop.org
> > > https://lists.freedesktop.org/mailman/listinfo/dri-devel
> >
> > --
> > Daniel Vetter
> > Software Engineer, Intel Corporation
> > http://blog.ffwll.ch
>
> --
> ====================
> | I would like to |
> | fix the world, |
> | but they're not |
> | giving me the |
> \ source code! /
> ---------------
> ¯\_(ツ)_/¯
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel



--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch

\
 
 \ /
  Last update: 2019-04-16 11:56    [W:0.050 / U:46.684 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site