lkml.org 
[lkml]   [2019]   [Apr]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 05/15] [media] mtk-mipicsi: get the w/h/bytepwerline for mtk_mipicsi
Date
This patch get the w/h/bytepwerline to save in mtk_mipicsi.

Signed-off-by: Stu Hsieh <stu.hsieh@mediatek.com>
---
.../media/platform/mtk-mipicsi/mtk_mipicsi.c | 39 +++++++++++++++++++
1 file changed, 39 insertions(+)

diff --git a/drivers/media/platform/mtk-mipicsi/mtk_mipicsi.c b/drivers/media/platform/mtk-mipicsi/mtk_mipicsi.c
index 16f6bc480f4e..10782fccca79 100644
--- a/drivers/media/platform/mtk-mipicsi/mtk_mipicsi.c
+++ b/drivers/media/platform/mtk-mipicsi/mtk_mipicsi.c
@@ -99,6 +99,9 @@ struct mtk_mipicsi_dev {
u32 id;
int clk_num;
struct clk *clk[MIPICSI_CLK];
+ u32 width;
+ u32 height;
+ u32 bytesperline;
};

#define MTK_MIPICSI_BUS_PARAM (V4L2_MBUS_MASTER | \
@@ -110,13 +113,36 @@ struct mtk_mipicsi_dev {
V4L2_MBUS_PCLK_SAMPLE_FALLING | \
V4L2_MBUS_DATA_ACTIVE_HIGH)

+static u32 get_bytesperline(const u32 fmt, const u32 width)
+{
+ u32 bytesperline = 0;
+
+ switch (fmt) {
+ case MEDIA_BUS_FMT_UYVY8_2X8:
+ case MEDIA_BUS_FMT_VYUY8_2X8:
+ case MEDIA_BUS_FMT_YUYV8_2X8:
+ case MEDIA_BUS_FMT_YVYU8_2X8:
+ bytesperline = width * 2U;
+ break;
+ default:
+ break;
+ }
+
+ return bytesperline;
+}
+
static int mtk_mipicsi_add_device(struct soc_camera_device *icd)
{
+ struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
+ struct mtk_mipicsi_dev *mipicsi = ici->priv;
struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
struct v4l2_subdev_format format = {
.which = V4L2_SUBDEV_FORMAT_ACTIVE,
};
int ret;
+ u32 width;
+ u32 height;
+ u32 fmt;

/* Get width/height info from subdev. Then use them to set register */
ret = v4l2_subdev_call(sd, pad, get_fmt, NULL, &format);
@@ -125,6 +151,19 @@ static int mtk_mipicsi_add_device(struct soc_camera_device *icd)
return ret;
}

+ width = format.format.width;
+ height = format.format.height;
+ fmt = format.format.code;
+ mipicsi->bytesperline = get_bytesperline(fmt, width);
+ if ((width == 0U) || (height == 0U) || (mipicsi->bytesperline == 0U)) {
+ dev_err(icd->parent, "invalid sub device width/height/bytesperline %d/%d/%d\n",
+ width, height, mipicsi->bytesperline);
+ return -EINVAL;
+ }
+
+ mipicsi->width = width;
+ mipicsi->height = height;
+
/*
* If power domain was closed before, it will be open.
* Then clock will be open and register will be set
--
2.18.0
\
 
 \ /
  Last update: 2019-04-16 11:31    [W:0.086 / U:8.156 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site