Messages in this thread Patch in this message | | | From | NeilBrown <> | Date | Tue, 16 Apr 2019 14:47:29 +1000 | Subject | [PATCH 2/5] mmc: mtk-sd: don't hard-code interrupt trigger type |
| |
When using devicetree for configuration, interrupt trigger type should be described in the dts file, not hard-coded in the C code.
The mtk-sd silicon in the mt7621 soc uses an active-high interrupt and so cannot be used with the current code.
So remove the trigger and leave it to be set from devicetree.
Signed-off-by: NeilBrown <neil@brown.name> --- drivers/mmc/host/mtk-sd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c index 4492a4465c0e..14e048239143 100644 --- a/drivers/mmc/host/mtk-sd.c +++ b/drivers/mmc/host/mtk-sd.c @@ -2243,7 +2243,7 @@ static int msdc_drv_probe(struct platform_device *pdev) msdc_init_hw(host); ret = devm_request_irq(&pdev->dev, host->irq, msdc_irq, - IRQF_TRIGGER_LOW | IRQF_ONESHOT, pdev->name, host); + 0, pdev->name, host); if (ret) goto release;
| |