[lkml]   [2019]   [Apr]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[PATCH v2 1/4] dt-bindings: usb: dwc2: Document quirk to reset PHY upon wakeup
On Rockchip rk3288 there's a hardware quirk where we need to assert
the reset signal to the PHY when we get a remote wakeup on one of the
two ports. Document this quirk in the bindings.

Signed-off-by: Douglas Anderson <>
Reviewed-by: Matthias Kaehlcke <>

Changes in v2: None

Documentation/devicetree/bindings/usb/dwc2.txt | 2 ++
1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt
index 6dc3c4a34483..f70f3aee4bfc 100644
--- a/Documentation/devicetree/bindings/usb/dwc2.txt
+++ b/Documentation/devicetree/bindings/usb/dwc2.txt
@@ -37,6 +37,8 @@ Refer to phy/phy-bindings.txt for generic phy consumer properties
- g-rx-fifo-size: size of rx fifo size in gadget mode.
- g-np-tx-fifo-size: size of non-periodic tx fifo size in gadget mode.
- g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0) in gadget mode.
+- snps,reset-phy-on-wake: If present indicates that we need to reset the PHY when
+ we detect a wakeup. This is due to a hardware errata.

Deprecated properties:
- g-use-dma: gadget DMA mode is automatically detected
 \ /
  Last update: 2019-04-16 23:55    [W:0.059 / U:8.804 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site