Messages in this thread | | | From | "Angus Ainslie (Purism)" <> | Subject | [PATCH v3 0/2] Add support for the Purism Librem5 devkit | Date | Mon, 15 Apr 2019 09:03:44 -0700 |
| |
The Librem5 devkit is based on the imx8mq from NXP. This is a default devicetree to boot the board to a command prompt.
Changes since v2:
Fixed incorrect phy-supply for the fsl-fec. Dropped unused regulator property. Fixup Makefile for linux-next.
Changes since v1:
Dropped config file. Updated the board compatible label. Changed node names to follow naming conventions. Added a more complete regulator hierachy. Removed unused nodes. Removed unknown devices. Fixed comment style. Dropped undocumented properties.
Angus Ainslie (Purism) (2): arm64: dts: fsl: librem5: Add a device tree for the Librem5 devkit dt-bindings: Add an entry for Purism SPC
.../devicetree/bindings/vendor-prefixes.txt | 1 + arch/arm64/boot/dts/freescale/Makefile | 1 + .../dts/freescale/imx8mq-librem5-devkit.dts | 844 ++++++++++++++++++ 3 files changed, 846 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
-- 2.17.1
| |