lkml.org 
[lkml]   [2019]   [Apr]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/4] dt-bindings: sound: sun4i-spdif: Add Allwinner H6 compatible
Hi Clement,

On Mon, Apr 15, 2019 at 10:30:38AM +0200, Clément Péron wrote:
> On Mon, 15 Apr 2019 at 10:18, Maxime Ripard <maxime.ripard@bootlin.com> wrote:
> >
> > On Mon, Apr 15, 2019 at 10:09:11AM +0200, Clément Péron wrote:
> > > Hi,
> > >
> > > On Mon, 15 Apr 2019 at 10:04, Maxime Ripard <maxime.ripard@bootlin.com> wrote:
> > > >
> > > > Hi,
> > > >
> > > > On Thu, Apr 11, 2019 at 11:44:19PM +0200, Clément Péron wrote:
> > > > > Allwinner H6 has a SPDIF controller with an increase of the fifo
> > > > > size and the possibility to output the master clock.
> > > > > However it's still compatible with the already existing driver for
> > > > > Allwiner H3.
> > > > >
> > > > > Add this compatible in the device-tree bindings documentation.
> > > >
> > > > How was this tested?
> > >
> > > Using Alsa utils on a Beelink GS1 and I check correct output sound on
> > > my home cinema.
> > >
> > > > After looking at the datasheet, it looks like it's still significantly
> > > > different. In particular:
> > > >
> > > > - The MCLK divider isn't at the same offset
> > >
> > > We don't use the MCLK
> > >
> > > > - The bits to flush the FIFO aren't at the same offset
> > > > - The FIFO trigger levels aren't at the same offset
> > > > - The FIFO status register layout is almost entirely different
> > >
> > > We use DMA not FIFO
> >
> > Well, DMA still uses the FIFOs. And even then, you're kind of missing
> > the point. The device tree's compatible is about whether a particular
> > device can be used as another one. How you are using it in the driver
> > is completely irrelevant.
>
> Sorry I meant " We use DMA not PIO".
>
> I didn't change the driver and the SPDIF is working what's irrelevant
> in declaring the driver as compatible ?
>
> If some feature are missing they can be introduce later as there is a
> special binding for H6 no ?

You have to drop fallback to allwinner,sun8i-h3-spdif at the very least:

+ #sound-dai-cells = <0>;
+ compatible = "allwinner,sun50i-h6-spdif",
+ "allwinner,sun8i-h3-spdif";
+ reg = <0x05093000 0x400>;

If the H6 hardware doesn't just implement some optional superset of what H3
does.

regards,
o.

> Clement
>
> >
> > Maxime
> >
> > --
> > Maxime Ripard, Bootlin
> > Embedded Linux and Kernel engineering
> > https://bootlin.com
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

\
 
 \ /
  Last update: 2019-04-15 17:07    [W:0.031 / U:4.104 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site