lkml.org 
[lkml]   [2019]   [Apr]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 7/7] dmaengine: sprd: Add interrupt support for 2-stage transfer
Date
For 2-stage transfer, some users like Audio still need transaction interrupt
to notify when the 2-stage transfer is completed. Thus we should enable
2-stage transfer interrupt to support this feature.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
drivers/dma/sprd-dma.c | 22 +++++++++++++++++++++-
1 file changed, 21 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/sprd-dma.c b/drivers/dma/sprd-dma.c
index cc9c24d..4c18f44 100644
--- a/drivers/dma/sprd-dma.c
+++ b/drivers/dma/sprd-dma.c
@@ -62,6 +62,8 @@
/* SPRD_DMA_GLB_2STAGE_GRP register definition */
#define SPRD_DMA_GLB_2STAGE_EN BIT(24)
#define SPRD_DMA_GLB_CHN_INT_MASK GENMASK(23, 20)
+#define SPRD_DMA_GLB_DEST_INT BIT(22)
+#define SPRD_DMA_GLB_SRC_INT BIT(20)
#define SPRD_DMA_GLB_LIST_DONE_TRG BIT(19)
#define SPRD_DMA_GLB_TRANS_DONE_TRG BIT(18)
#define SPRD_DMA_GLB_BLOCK_DONE_TRG BIT(17)
@@ -135,6 +137,7 @@
/* define DMA channel mode & trigger mode mask */
#define SPRD_DMA_CHN_MODE_MASK GENMASK(7, 0)
#define SPRD_DMA_TRG_MODE_MASK GENMASK(7, 0)
+#define SPRD_DMA_INT_TYPE_MASK GENMASK(7, 0)

/* define the DMA transfer step type */
#define SPRD_DMA_NONE_STEP 0
@@ -190,6 +193,7 @@ struct sprd_dma_chn {
u32 dev_id;
enum sprd_dma_chn_mode chn_mode;
enum sprd_dma_trg_mode trg_mode;
+ enum sprd_dma_int_type int_type;
struct sprd_dma_desc *cur_desc;
};

@@ -429,6 +433,9 @@ static int sprd_dma_set_2stage_config(struct sprd_dma_chn *schan)
val = chn & SPRD_DMA_GLB_SRC_CHN_MASK;
val |= BIT(schan->trg_mode - 1) << SPRD_DMA_GLB_TRG_OFFSET;
val |= SPRD_DMA_GLB_2STAGE_EN;
+ if (schan->int_type != SPRD_DMA_NO_INT)
+ val |= SPRD_DMA_GLB_SRC_INT;
+
sprd_dma_glb_update(sdev, SPRD_DMA_GLB_2STAGE_GRP1, val, val);
break;

@@ -436,6 +443,9 @@ static int sprd_dma_set_2stage_config(struct sprd_dma_chn *schan)
val = chn & SPRD_DMA_GLB_SRC_CHN_MASK;
val |= BIT(schan->trg_mode - 1) << SPRD_DMA_GLB_TRG_OFFSET;
val |= SPRD_DMA_GLB_2STAGE_EN;
+ if (schan->int_type != SPRD_DMA_NO_INT)
+ val |= SPRD_DMA_GLB_SRC_INT;
+
sprd_dma_glb_update(sdev, SPRD_DMA_GLB_2STAGE_GRP2, val, val);
break;

@@ -443,6 +453,9 @@ static int sprd_dma_set_2stage_config(struct sprd_dma_chn *schan)
val = (chn << SPRD_DMA_GLB_DEST_CHN_OFFSET) &
SPRD_DMA_GLB_DEST_CHN_MASK;
val |= SPRD_DMA_GLB_2STAGE_EN;
+ if (schan->int_type != SPRD_DMA_NO_INT)
+ val |= SPRD_DMA_GLB_DEST_INT;
+
sprd_dma_glb_update(sdev, SPRD_DMA_GLB_2STAGE_GRP1, val, val);
break;

@@ -450,6 +463,9 @@ static int sprd_dma_set_2stage_config(struct sprd_dma_chn *schan)
val = (chn << SPRD_DMA_GLB_DEST_CHN_OFFSET) &
SPRD_DMA_GLB_DEST_CHN_MASK;
val |= SPRD_DMA_GLB_2STAGE_EN;
+ if (schan->int_type != SPRD_DMA_NO_INT)
+ val |= SPRD_DMA_GLB_DEST_INT;
+
sprd_dma_glb_update(sdev, SPRD_DMA_GLB_2STAGE_GRP2, val, val);
break;

@@ -911,11 +927,15 @@ static int sprd_dma_fill_linklist_desc(struct dma_chan *chan,
schan->linklist.virt_addr = 0;
}

- /* Set channel mode and trigger mode for 2-stage transfer */
+ /*
+ * Set channel mode, interrupt mode and trigger mode for 2-stage
+ * transfer.
+ */
schan->chn_mode =
(flags >> SPRD_DMA_CHN_MODE_SHIFT) & SPRD_DMA_CHN_MODE_MASK;
schan->trg_mode =
(flags >> SPRD_DMA_TRG_MODE_SHIFT) & SPRD_DMA_TRG_MODE_MASK;
+ schan->int_type = flags & SPRD_DMA_INT_TYPE_MASK;

sdesc = kzalloc(sizeof(*sdesc), GFP_NOWAIT);
if (!sdesc)
--
1.7.9.5
\
 
 \ /
  Last update: 2019-04-15 14:16    [W:0.038 / U:9.204 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site