lkml.org 
[lkml]   [2019]   [Apr]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v1 0/2] misc: Add NPCM LPC BPC driver support
Date
This patch set adds BIOS Post code (BPC) support for the
Nuvoton NPCM Baseboard Management Controller (BMC).

Nuvoton BMC NPCM BIOS Post Code (BPC) monitoring two
configurable I/O addresses written by the host on the
Low Pin Count (LPC) bus, the capture data stored in 128-word FIFO.

NPCM BPC can support capture double words.

I have created common lpc-snoop documentation for both
Nuvoton and Aspeed drivers as Andrew suggested.
Andrew Jeffery: https://patchwork.kernel.org/patch/10506269/

I prefer to add the lpc-dnoop documentation to misc folder instead
of creating new /devicetree/binding folder that named BMC
as been done in the last lpc-snoop patchset because I am not sure
is something that should be done for only
one module for now.
https://patchwork.kernel.org/patch/10506269/

The NPCM7xx BPC driver tested on NPCM750 evaluation board.

Tomer Maimon (2):
dt-binding: misc: Add common LPC snoop documentation
misc: npcm: add NPCM LPC BPC driver

.../devicetree/bindings/misc/lpc-snoop.txt | 27 ++
drivers/misc/Kconfig | 8 +
drivers/misc/Makefile | 1 +
drivers/misc/npcm-lpc-bpc-snoop.c | 393 +++++++++++++++++++++
4 files changed, 429 insertions(+)
create mode 100644 Documentation/devicetree/bindings/misc/lpc-snoop.txt
create mode 100644 drivers/misc/npcm-lpc-bpc-snoop.c

--
2.14.1

\
 
 \ /
  Last update: 2019-04-15 14:14    [W:0.037 / U:20.212 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site