lkml.org 
[lkml]   [2019]   [Apr]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 2/3] dt-bindings: backlight: add lm3630a bindings
From
Date
Brian
On 4/15/19 2:29 AM, Brian Masney wrote:
> Add new backlight bindings for the TI LM3630A dual-string white LED.
>
> Signed-off-by: Brian Masney <masneyb@onstation.org>
> ---
> Rob: Since the common bindings aren't converted to the new JSON schema
> yet, I'm not sure how to do led-sources here. I would expect that we'd
> have the uint32-array on the common binding once it exists. I had to
> add it here to keep 'make dt_binding_check' happy. I left the
> description off though for that property since that'll come from common
> once its converted.
>
> Changes since v2:
> - Update description of max-brightness
> - Add description for reg
> - Correct typo: s/tranisiton/transition
> - Remove label from bindings since this isn't on backlight_properties
> - add reg to control banks
> - add additionalProperties
>
> .../leds/backlight/lm3630a-backlight.yaml | 124 ++++++++++++++++++
> 1 file changed, 124 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
>
> diff --git a/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
> new file mode 100644
> index 000000000000..cccd43c02732
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
> @@ -0,0 +1,124 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/leds/backlight/lm3630a-backlight.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: TI LM3630A High-Efficiency Dual-String White LED
> +
> +maintainers:
> + - Lee Jones <lee.jones@linaro.org>
> + - Daniel Thompson <daniel.thompson@linaro.org>
> + - Jingoo Han <jingoohan1@gmail.com>
> +
> +description: |
> + The LM3630A is a current-mode boost converter which supplies the power and
> + controls the current in up to two strings of 10 LEDs per string.
> + https://www.ti.com/product/LM3630A
> +
> +properties:
> + compatible:
> + const: ti,lm3630a
> +
> + reg:
> + description: The I2C address of the device
> + maxItems: 1
> +
> + ti,linear-mapping-mode:
> + description: |
> + Enable linear mapping mode. If disabled, then it will use exponential
> + mapping mode in which the ramp up/down appears to have a more uniform
> + transition to the human eye.
> + type: boolean
> +
> +required:
> + - compatible
> + - reg
> +
> +patternProperties:
> + "^led@[01]$":
> + type: object
> + description: |
> + Properties for a string of connected LEDs.
> +
> + properties:
> + reg:
> + description: Control Bank
> + maxItems: 1
> + minimum: 0
> + maximum: 1
> +
> + led-sources:
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32-array
> + - minItems: 1
> + maxItems: 2
> + items:
> + minimum: 0
> + maximum: 1
> +
> + default-brightness:
> + description: Default brightness level on boot.
> + minimum: 0
> + maximum: 255
> +
> + max-brightness:
> + description: Maximum brightness that is allowed during runtime.
> + minimum: 0
> + maximum: 255
> +
> + required:
> + - reg
> +
> + additionalProperties: false
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + lm3630a_bl@38 {
> + compatible = "ti,lm3630a";
> + status = "ok";
> + reg = <0x38>;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + led@0 {
> + reg = <0>;
> + led-sources = <0 1>;
> + default-brightness = <200>;
> + max-brightness = <255>;
> + };
> + };
> + };
> + - |

I noticed we are missing "label". It is defined as optional and it is hard coded in the driver
but wondering if there is a need to add it.


Dan
<snip>

\
 
 \ /
  Last update: 2019-04-15 14:11    [W:0.043 / U:3.700 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site