[lkml]   [2019]   [Apr]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v2 0/4] Add QCS404 interconnect provider driver
Add driver to support scaling of the on-chip interconnects on QCS404-based
platforms. Also add the necessary device-tree nodes, so that the driver for
each NoC can probe and register as interconnect-provider.

- Use the clk_bulk API. (Bjorn)
- Move the port IDs into the provider file. (Bjorn)
- Use ARRAY_SIZE in the macro to automagically count the num_links. (Bjorn)
- Improve code readability. (Bjorn)
- Add patch [4/4] introducing a qcom,qos DT property to represent the link to
the MMIO QoS registers HW block.


Bjorn Andersson (1):
interconnect: qcom: Add QCS404 interconnect provider driver

Georgi Djakov (3):
dt-bindings: interconnect: Add Qualcomm QCS404 DT bindings
arm64: dts: qcs404: Add interconnect provider DT nodes
dt-bindings: interconnect: qcs404: Introduce qcom,qos DT property

.../bindings/interconnect/qcom,qcs404.txt | 76 +++
arch/arm64/boot/dts/qcom/qcs404.dtsi | 25 +
drivers/interconnect/qcom/Kconfig | 8 +
drivers/interconnect/qcom/Makefile | 2 +
drivers/interconnect/qcom/qcs404.c | 559 ++++++++++++++++++
.../dt-bindings/interconnect/qcom,qcs404.h | 88 +++
6 files changed, 758 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interconnect/qcom,qcs404.txt
create mode 100644 drivers/interconnect/qcom/qcs404.c
create mode 100644 include/dt-bindings/interconnect/qcom,qcs404.h

 \ /
  Last update: 2019-04-15 12:45    [W:0.076 / U:7.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site