lkml.org 
[lkml]   [2019]   [Apr]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/4] dt-bindings: sound: sun4i-spdif: Add Allwinner H6 compatible
On Mon, 15 Apr 2019 at 10:09, Clément Péron <peron.clem@gmail.com> wrote:
>
> Hi,
>
> On Mon, 15 Apr 2019 at 10:04, Maxime Ripard <maxime.ripard@bootlin.com> wrote:
> >
> > Hi,
> >
> > On Thu, Apr 11, 2019 at 11:44:19PM +0200, Clément Péron wrote:
> > > Allwinner H6 has a SPDIF controller with an increase of the fifo
> > > size and the possibility to output the master clock.
> > > However it's still compatible with the already existing driver for
> > > Allwiner H3.
> > >
> > > Add this compatible in the device-tree bindings documentation.
> >
> > How was this tested?
>
> Using Alsa utils on a Beelink GS1 and I check correct output sound on
> my home cinema.
> >
> > After looking at the datasheet, it looks like it's still significantly
> > different. In particular:
> >
> > - The MCLK divider isn't at the same offset
> We don't use the MCLK
> > - The bits to flush the FIFO aren't at the same offset
> > - The FIFO trigger levels aren't at the same offset
> > - The FIFO status register layout is almost entirely different
> We use DMA not FIFO

And also only SPDIF Tx has been tested.

>
> Clement
> >
> > So it doesn't really look compatible to me
> >
> > Maxime
> >
> > --
> > Maxime Ripard, Bootlin
> > Embedded Linux and Kernel engineering
> > https://bootlin.com

\
 
 \ /
  Last update: 2019-04-15 10:12    [W:0.049 / U:10.932 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site