[lkml]   [2019]   [Apr]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH 1/4] dt-bindings: sound: sun4i-spdif: Add Allwinner H6 compatible

On Thu, Apr 11, 2019 at 11:44:19PM +0200, Clément Péron wrote:
> Allwinner H6 has a SPDIF controller with an increase of the fifo
> size and the possibility to output the master clock.
> However it's still compatible with the already existing driver for
> Allwiner H3.
> Add this compatible in the device-tree bindings documentation.

How was this tested?

After looking at the datasheet, it looks like it's still significantly
different. In particular:

- The MCLK divider isn't at the same offset
- The bits to flush the FIFO aren't at the same offset
- The FIFO trigger levels aren't at the same offset
- The FIFO status register layout is almost entirely different

So it doesn't really look compatible to me


Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
[unhandled content-type:application/pgp-signature]
 \ /
  Last update: 2019-04-15 10:05    [W:0.051 / U:5.428 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site