lkml.org 
[lkml]   [2019]   [Apr]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.14 68/69] arm64: dts: rockchip: fix vcc_host1_5v pin assign on rk3328-rock64
Date
From: Katsuhiro Suzuki <katsuhiro@katsuster.net>

commit ef05bcb60c1a8841e38c91923ba998181117a87c upstream.

This patch fixes pin assign of vcc_host1_5v. This regulator is
controlled by USB20_HOST_DRV signal.

ROCK64 schematic says that GPIO0_A2 pin is used as USB20_HOST_DRV.
GPIO0_D3 pin is for SPDIF_TX_M0.

Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
arch/arm64/boot/dts/rockchip/rk3328-rock64.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
@@ -83,7 +83,7 @@
vcc_host1_5v: vcc_otg_5v: vcc-host1-5v-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb20_host_drv>;
regulator-name = "vcc_host1_5v";
@@ -275,7 +275,7 @@

usb2 {
usb20_host_drv: usb20-host-drv {
- rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};


\
 
 \ /
  Last update: 2019-04-15 21:27    [W:0.154 / U:12.020 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site