lkml.org 
[lkml]   [2019]   [Apr]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V2 net-next 10/12] net: hns3: do not initialize MDIO bus when PHY is inexistent
Date
From: Jian Shen <shenjian15@huawei.com>

For some cases, PHY may not be connected to MDIO bus, then
the driver will initialize fail since MDIO bus initialization
fails.

This patch fixes it by skipping the MDIO bus initialization
when PHY is inexistent.

Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
index 48eda2c..12be4e2 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
@@ -121,12 +121,18 @@ static int hclge_mdio_read(struct mii_bus *bus, int phyid, int regnum)

int hclge_mac_mdio_config(struct hclge_dev *hdev)
{
+#define PHY_INEXISTENT 255
+
struct hclge_mac *mac = &hdev->hw.mac;
struct phy_device *phydev;
struct mii_bus *mdio_bus;
int ret;

- if (hdev->hw.mac.phy_addr >= PHY_MAX_ADDR) {
+ if (hdev->hw.mac.phy_addr == PHY_INEXISTENT) {
+ dev_info(&hdev->pdev->dev,
+ "no phy device is connected to mdio bus\n");
+ return 0;
+ } else if (hdev->hw.mac.phy_addr >= PHY_MAX_ADDR) {
dev_err(&hdev->pdev->dev, "phy_addr(%d) is too large.\n",
hdev->hw.mac.phy_addr);
return -EINVAL;
--
2.7.4
\
 
 \ /
  Last update: 2019-04-14 03:50    [W:0.052 / U:0.520 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site