lkml.org 
[lkml]   [2019]   [Apr]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1] clk: tegra20/30: Add custom EMC clock implementation
On Fri, Apr 12, 2019 at 01:47:08AM +0300, Dmitry Osipenko wrote:
> A proper External Memory Controller clock rounding and parent selection
> functionality is required by the EMC drivers. It is not available using
> the generic clock implementation, hence add a custom one. The clock rate
> rounding shall be done by the EMC drivers because they have information
> about available memory timings, so the drivers will have to register a
> callback that will round the requested rate. EMC clock users won't be able
> to request EMC clock by getting -EPROBE_DEFER until EMC driver is probed
> and the callback is set up. The functionality is somewhat similar to the
> clk-emc.c which serves Tegra124+ SoC's, the later HW generations support
> more parent clock sources and the HW configuration and integration with
> the EMC drivers differs a tad from the older gens, hence it's not really
> worth to try to squash everything into a single source file.
>
..

> + val = readl_relaxed(emc->ioaddr);
> + val &= ~CLK_SOURCE_EMC_2X_CLK_DIVISOR_MASK;
> + val |= div;
> +
> + parent = val >> CLK_SOURCE_EMC_2X_CLK_SRC_SHIFT;
> +
> + if (parent == EMC_SRC_PLL_M && div == 0 && emc->want_low_jitter)
> + val |= USE_PLLM_UD;
> + else
> + val &= ~USE_PLLM_UD;
> +

Note that low jitter means the divider is bypassed, so you can only use
this when div == 1.

> + writel_relaxed(val, emc->ioaddr);
> +
> + return 0;
> +}
> +
> +static int emc_set_rate_and_parent(struct clk_hw *hw,
> + unsigned long rate,
> + unsigned long parent_rate,
> + u8 index)
> +{
> + struct tegra_clk_emc *emc = to_tegra_clk_emc(hw);
> + u32 val, div;
> +
> + div = div_frac_get(rate, parent_rate, 8, 1, 0);
> +
> + val = readl_relaxed(emc->ioaddr);
> +
> + val &= ~CLK_SOURCE_EMC_2X_CLK_SRC_MASK;
> + val |= index << CLK_SOURCE_EMC_2X_CLK_SRC_SHIFT;
> +
> + val &= ~CLK_SOURCE_EMC_2X_CLK_DIVISOR_MASK;
> + val |= div;
> +
> + if (index == EMC_SRC_PLL_M && div == 0 && emc->want_low_jitter)
> + val |= USE_PLLM_UD;
> + else
> + val &= ~USE_PLLM_UD;
> +

Same here ofcourse.

Peter.

\
 
 \ /
  Last update: 2019-04-12 09:47    [W:0.058 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site