lkml.org 
[lkml]   [2019]   [Apr]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 1/2] spi: pxa2xx: fix SCR (divisor) calculation
Date
Hi Jarkko,

> > diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
> > index f7068cc..c9560a1 100644
> > --- a/drivers/spi/spi-pxa2xx.c
> > +++ b/drivers/spi/spi-pxa2xx.c
> > @@ -884,10 +884,15 @@ static unsigned int ssp_get_clk_div(struct
> driver_data *drv_data, int rate)
> >
> > rate = min_t(int, ssp_clk, rate);
> >
> > + /*
> > + * Calculate the divisor for the SCR (Serial Clock Rate), avoiding
> > + * that the SSP transmission rate can be greater than the device
> rate
> > + */
> > if (ssp->type == PXA25x_SSP || ssp->type == CE4100_SSP)
> > - return (ssp_clk / (2 * rate) - 1) & 0xff;
> > + return (ssp_clk / (2 * rate) - 1 +
> > + (ssp_clk % (2 * rate) ? 1 : 0)) & 0xff;
> > else
> > - return (ssp_clk / rate - 1) & 0xfff;
> > + return (ssp_clk / rate - 1 + (ssp_clk % rate ? 1 : 0)) &
> 0xfff;
> > }
> >
> I think DIV_ROUND_UP() - 1 would also fix this?
>
> I realized we have also another issue here with the low rates.
> Calculated divider will underflow due masking with 0xff or 0xfff when
> the rate is low enough.
>
> Would you want to fix that by setting the ctlr->min_speed_hz so that spi
> core can validate the rate? I'm asking since it goes well together with
> your fix. Maybe one patch setting the min_speed_hz and getting masking
> off from here and then another fixing the rate calculation.

Ok for the two separate patches, I prepare them as soon as I can.

Thanks,

Flavio
\
 
 \ /
  Last update: 2019-04-11 15:10    [W:0.094 / U:0.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site