lkml.org 
[lkml]   [2019]   [Apr]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/3] dt-bindings: phy: rcar-gen3-phy-usb2: Revise #phy-cells property
Date
To have the detailed property on each PHY specifier, this patch revises
the #phy-cells property.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
index 23894db..d46188f 100644
--- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
+++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
@@ -29,7 +29,13 @@ Required properties:

- reg: offset and length of the partial USB 2.0 Host register block.
- clocks: clock phandle and specifier pair(s).
-- #phy-cells: see phy-bindings.txt in the same directory, must be <0>.
+- #phy-cells: see phy-bindings.txt in the same directory, must be <1> (and
+ using <0> is deprecated).
+
+The phandle's argument in the PHY specifier is the INT_STATUS bit of controller:
+- 1 = USBH_INTA (OHCI)
+- 2 = USBH_INTB (EHCI)
+- 3 = UCOM_INT (OTG and BC)

Optional properties:
To use a USB channel where USB 2.0 Host and HSUSB (USB 2.0 Peripheral) are
--
2.7.4
\
 
 \ /
  Last update: 2019-04-11 12:32    [W:0.030 / U:0.804 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site