lkml.org 
[lkml]   [2019]   [Apr]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 1/2] dt-bindings: serial: add documentation for the SiFive UART driver
Date
Add DT binding documentation for the Linux driver for the SiFive
asynchronous serial IP block.

This revision incorporates changes based on feedback from Rob
Herring <robh@kernel.org>.

Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: linux-serial@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
---
.../bindings/serial/sifive-serial.txt | 33 +++++++++++++++++++
1 file changed, 33 insertions(+)
create mode 100644 Documentation/devicetree/bindings/serial/sifive-serial.txt

diff --git a/Documentation/devicetree/bindings/serial/sifive-serial.txt b/Documentation/devicetree/bindings/serial/sifive-serial.txt
new file mode 100644
index 000000000000..c86b1e524159
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/sifive-serial.txt
@@ -0,0 +1,33 @@
+SiFive asynchronous serial interface (UART)
+
+Required properties:
+
+- compatible: should be something similar to
+ "sifive,<chip>-uart" for the UART as integrated
+ on a particular chip, and "sifive,uart<version>" for the
+ general UART IP block programming model. Supported
+ compatible strings as of the date of this writing are:
+ "sifive,fu540-c000-uart" for the SiFive UART v0 as
+ integrated onto the SiFive FU540 chip, or "sifive,uart0"
+ for the SiFive UART v0 IP block with no chip integration
+ tweaks (if any)
+- reg: address and length of the register space
+- interrupts: Should contain the UART interrupt identifier
+- clocks: Should contain a clock identifier for the UART's parent clock
+
+
+UART HDL that corresponds to the IP block version numbers can be found
+here:
+
+https://github.com/sifive/sifive-blocks/tree/master/src/main/scala/devices/uart
+
+
+Example:
+
+uart0: serial@10010000 {
+ compatible = "sifive,fu540-c000-uart", "sifive,uart0";
+ interrupt-parent = <&plic0>;
+ interrupts = <80>;
+ reg = <0x0 0x10010000 0x0 0x1000>;
+ clocks = <&prci PRCI_CLK_TLCLK>;
+};
--
2.20.1
\
 
 \ /
  Last update: 2019-04-11 11:01    [W:0.076 / U:0.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site