lkml.org 
[lkml]   [2019]   [Apr]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v4 00/36] thunderbolt: Software connection manager improvements
Date
Hi,

This is fourth iteration of the patch series improving software connection
manager capabilities to support:

- PCIe tunnels for full daisy chain up to 6 devices
- Display port tunneling
- P2P networking

The series applies on top of thunderbolt.git/next.

Previous version of the patch series can be viewed here:

v3: https://lkml.org/lkml/2019/3/28/310
v2: https://lkml.org/lkml/2019/2/6/347
v1: https://lkml.org/lkml/2019/1/29/924

Changes from v3:

* Added tags from Lukas.

* Fixed typo get_switch_by_route() -> get_switch_at_route().

* In patch 12 drop check for port->sw->is_unplugged (done already in
patch 4) and add check for -ENODEV instead.

* Fixed tb_path_alloc() to make sure in_hopid matches the previous
out_hopid in patch 19. Also updated kernel-docs accordingly.

* Added missing \n termination in patch 34.

Changes from v2 (major):

* Always set port->remote even in case of dual link connection.

* Leave (DP, PCIe) tunnels up when the driver is unloaded. When loaded
back, it discovers the existing tunnels and updated data structures
accordingly. I noticed that the code in v2 did not support cases
properly when you unplug something before the driver gets loaded back.
This version tears down partial paths during discovery.

* Do not automatically create PCIe tunnels. Instead we implement "user"
security level in the software connection manager as well taking
advantage of the existing sysfs interfaces. This allows user to disable
PCIe tunneling completely or implement different white listing
policies. Major distros include bolt system daemon that takes care of
this.

* When testing on two-port Falcon Ridge based system I realized
that we always just pick the first available PCIe downstream adapter
regardless of which Thunderbolt port you plug the device which is not
consistent. To solve this we add mapping between host PCIe downstream
adapter and the Thunderbolt port for Cactus Ridge and Falcon Ridge
based systems.

* Take domain lock in switch sysfs callbacks. This is needed because the
software connection manager needs to walk over the topology during
tunnel creation so switch_lock is not enough anymore.

Changes from v1:

* Added ACK from David

* Add constant (TMU_ACCESS_EN) for BIT(20) when TMU access is enabled. We
keep it in cap.c close to the LR/ER workaround. Also we enable/disable
only during capability walk. If it turns we need to have it enabled
elsewhere we can move it to switch.c and enable just once during
switch enumeration.

* Use 0 to mean no cap_adap instead of negative value. This follows
cap_phy.

* Use correct PCI IDs (_BRIDGE) in the last patch where we start firmware
on Titan Ridge. It wrongly used NHI PCI IDs in v1.

Mika Westerberg (36):
net: thunderbolt: Unregister ThunderboltIP protocol handler when suspending
thunderbolt: Remove unused work field in struct tb_switch
thunderbolt: Drop duplicated get_switch_at_route()
thunderbolt: Block reads and writes if switch is unplugged
thunderbolt: Take domain lock in switch sysfs attribute callbacks
thunderbolt: Do not allocate switch if depth is greater than 6
thunderbolt: Enable TMU access when accessing port space on legacy devices
thunderbolt: Add dummy read after port capability list walk on Light Ridge
thunderbolt: Move LC specific functionality into a separate file
thunderbolt: Configure lanes when switch is initialized
thunderbolt: Set sleep bit when suspending switch
thunderbolt: Properly disable path
thunderbolt: Cache adapter specific capability offset into struct port
thunderbolt: Rename tunnel_pci to tunnel
thunderbolt: Generalize tunnel creation functionality
thunderbolt: Add functions for allocating and releasing HopIDs
thunderbolt: Assign remote for both ports in case of dual link
thunderbolt: Add helper function to iterate from one port to another
thunderbolt: Extend tunnel creation to more than 2 adjacent switches
thunderbolt: Deactivate all paths before restarting them
thunderbolt: Discover preboot PCIe paths the boot firmware established
thunderbolt: Add support for full PCIe daisy chains
thunderbolt: Scan only valid NULL adapter ports in hotplug
thunderbolt: Generalize port finding routines to support all port types
thunderbolt: Rework NFC credits handling
thunderbolt: Add support for Display Port tunnels
thunderbolt: Do not tear down tunnels when driver is unloaded
thunderbolt: Run tb_xdp_handle_request() in system workqueue
thunderbolt: Add XDomain UUID exchange support
thunderbolt: Add support for DMA tunnels
thunderbolt: Make tb_switch_alloc() return ERR_PTR()
thunderbolt: Add support for XDomain connections
thunderbolt: Make __TB_[SW|PORT]_PRINT take const parameters
thunderbolt: Make rest of the logging to happen at debug level
thunderbolt: Reword output of tb_dump_hop()
thunderbolt: Start firmware on Titan Ridge Apple systems

drivers/net/thunderbolt.c | 3 +
drivers/thunderbolt/Makefile | 4 +-
drivers/thunderbolt/cap.c | 85 +++-
drivers/thunderbolt/ctl.c | 2 +-
drivers/thunderbolt/icm.c | 60 ++-
drivers/thunderbolt/lc.c | 179 ++++++++
drivers/thunderbolt/nhi.c | 3 +-
drivers/thunderbolt/path.c | 420 ++++++++++++++++---
drivers/thunderbolt/switch.c | 551 +++++++++++++++++++-----
drivers/thunderbolt/tb.c | 608 ++++++++++++++++++++-------
drivers/thunderbolt/tb.h | 225 ++++++++--
drivers/thunderbolt/tb_msgs.h | 11 +
drivers/thunderbolt/tb_regs.h | 50 ++-
drivers/thunderbolt/tunnel.c | 691 +++++++++++++++++++++++++++++++
drivers/thunderbolt/tunnel.h | 78 ++++
drivers/thunderbolt/tunnel_pci.c | 226 ----------
drivers/thunderbolt/tunnel_pci.h | 31 --
drivers/thunderbolt/xdomain.c | 147 ++++++-
include/linux/thunderbolt.h | 8 +
19 files changed, 2720 insertions(+), 662 deletions(-)
create mode 100644 drivers/thunderbolt/lc.c
create mode 100644 drivers/thunderbolt/tunnel.c
create mode 100644 drivers/thunderbolt/tunnel.h
delete mode 100644 drivers/thunderbolt/tunnel_pci.c
delete mode 100644 drivers/thunderbolt/tunnel_pci.h

--
2.20.1

\
 
 \ /
  Last update: 2019-04-10 15:43    [W:0.135 / U:4.420 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site