lkml.org 
[lkml]   [2019]   [Apr]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4] dt-bindings: gpu: add bindings for the ARM Mali Bifrost GPU
From
Date
On 01/04/2019 12:00, Steven Price wrote:
> On 01/04/2019 09:09, Neil Armstrong wrote:
>> Add the bindings for the Bifrost family of ARM Mali GPUs.
>>
>> The Bifrost GPU architecture is similar to the Midgard family,
>> but with a different Shader Core & Execution Engine structures.
>>
>> Bindings are based on the Midgard family bindings, but the inner
>> architectural changes makes it a separate family needing separate
>> bindings.
>>
>> The Bifrost GPUs are present in a number of recent SoCs, like the
>> Amlogic G12A Family, and many other vendors.
>> The Amlogic vendor specific compatible is added to handle the
>> specific IP integration differences and dependencies.
>>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>> ---
>> .../bindings/gpu/arm,mali-bifrost.txt | 92 +++++++++++++++++++
>> 1 file changed, 92 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/gpu/arm,mali-bifrost.txt
>>
>> Changes since v3:
>> - Added note about discoverable model/revision
>> - Enforced fixed defined irq order
>> - Fixed typo in accommodate
>>
>> Changes since v2:
>> - moved to a single compatible since HW is fully discoverable
>>
>> diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.txt b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.txt
>> new file mode 100644
>> index 000000000000..711c9ead17a2
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.txt
>> @@ -0,0 +1,92 @@
>> +ARM Mali Bifrost GPU
>> +====================
>> +
>> +Required properties:
>> +
>> +- compatible :
>> + * Since Mali Bifrost GPU model/revision if fully discoverable by reading
> ^^
> s/if/is/

Thanks for pointing this.

>
>> + some determined registers, must contain the following:
>> + + "arm,mali-bifrost"
>> + * which must be preceded by one of the following vendor specifics:
>> + + "amlogic,meson-g12a-mali"
>> +
>> +- reg : Physical base address of the device and length of the register area.
>> +
>> +- interrupts : Contains the three IRQ lines required by Mali Bifrost devices,
>> + in the following defined order.
>> +
>> +- interrupt-names : Contains the names of IRQ resources in this exact defined
>> + order: "job", "mmu", "gpu".
>
> Is there any point in having "interrupt-names" if we're fixing the
> order? Although I guess it helps match the Midgard bindings.

Exact.

Neil

>
> Steve
>
>> +
>> +Optional properties:
>> +
>> +- clocks : Phandle to clock for the Mali Bifrost device.
>> +
>> +- mali-supply : Phandle to regulator for the Mali device. Refer to
>> + Documentation/devicetree/bindings/regulator/regulator.txt for details.
>> +
>> +- operating-points-v2 : Refer to Documentation/devicetree/bindings/opp/opp.txt
>> + for details.
>> +
>> +- resets : Phandle of the GPU reset line.
>> +
>> +Vendor-specific bindings
>> +------------------------
>> +
>> +The Mali GPU is integrated very differently from one SoC to
>> +another. In order to accommodate those differences, you have the option
>> +to specify one more vendor-specific compatible, among:
>> +
>> +- "amlogic,meson-g12a-mali"
>> + Required properties:
>> + - resets : Should contain phandles of :
>> + + GPU reset line
>> + + GPU APB glue reset line
>> +
>> +Example for a Mali-G31:
>> +
>> +gpu@ffa30000 {
>> + compatible = "amlogic,meson-g12a-mali", "arm,mali-bifrost";
>> + reg = <0xffe40000 0x10000>;
>> + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
>> + interrupt-names = "job", "mmu", "gpu";
>> + clocks = <&clk CLKID_MALI>;
>> + mali-supply = <&vdd_gpu>;
>> + operating-points-v2 = <&gpu_opp_table>;
>> + resets = <&reset RESET_DVALIN_CAPB3>, <&reset RESET_DVALIN>;
>> +};
>> +
>> +gpu_opp_table: opp_table0 {
>> + compatible = "operating-points-v2";
>> +
>> + opp@533000000 {
>> + opp-hz = /bits/ 64 <533000000>;
>> + opp-microvolt = <1250000>;
>> + };
>> + opp@450000000 {
>> + opp-hz = /bits/ 64 <450000000>;
>> + opp-microvolt = <1150000>;
>> + };
>> + opp@400000000 {
>> + opp-hz = /bits/ 64 <400000000>;
>> + opp-microvolt = <1125000>;
>> + };
>> + opp@350000000 {
>> + opp-hz = /bits/ 64 <350000000>;
>> + opp-microvolt = <1075000>;
>> + };
>> + opp@266000000 {
>> + opp-hz = /bits/ 64 <266000000>;
>> + opp-microvolt = <1025000>;
>> + };
>> + opp@160000000 {
>> + opp-hz = /bits/ 64 <160000000>;
>> + opp-microvolt = <925000>;
>> + };
>> + opp@100000000 {
>> + opp-hz = /bits/ 64 <100000000>;
>> + opp-microvolt = <912500>;
>> + };
>> +};
>>
>

\
 
 \ /
  Last update: 2019-04-01 13:25    [W:0.120 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site