lkml.org 
[lkml]   [2019]   [Apr]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 3/3] backlight: lm3630a: add device tree supprt
Date
Add device tree support to the lm3630a driver and allow configuring
independently on both banks the mapping mode (linear or exponential),
initial and maximum LED brightness.

Driver was tested on a LG Nexus 5 (hammerhead) phone.

Signed-off-by: Brian Masney <masneyb@onstation.org>
---
drivers/video/backlight/lm3630a_bl.c | 69 ++++++++++++++++++++++++++++
1 file changed, 69 insertions(+)

diff --git a/drivers/video/backlight/lm3630a_bl.c b/drivers/video/backlight/lm3630a_bl.c
index ef2553f452ca..96fbc1273dda 100644
--- a/drivers/video/backlight/lm3630a_bl.c
+++ b/drivers/video/backlight/lm3630a_bl.c
@@ -35,6 +35,9 @@
#define REG_MAX 0x50

#define INT_DEBOUNCE_MSEC 10
+
+#define LM3630A_MAX_SOURCES 2
+
struct lm3630a_chip {
struct device *dev;
struct delayed_work work;
@@ -364,6 +367,64 @@ static const struct regmap_config lm3630a_regmap = {
.max_register = REG_MAX,
};

+static void lm3630a_parse_dt(struct lm3630a_chip *pchip)
+{
+ u32 sources[LM3630A_MAX_SOURCES], val;
+ struct device_node *child_node;
+ int num_sources, ret, i;
+ bool linear;
+
+ for_each_available_child_of_node(pchip->dev->of_node, child_node) {
+ num_sources = of_property_count_u32_elems(child_node,
+ "led-sources");
+ if (num_sources < 0)
+ continue;
+
+ if (num_sources > LM3630A_MAX_SOURCES)
+ num_sources = LM3630A_MAX_SOURCES;
+
+ ret = of_property_read_u32_array(child_node, "led-sources",
+ sources, num_sources);
+ if (ret) {
+ dev_err(pchip->dev,
+ "Error parsing led-sources node: %d\n", ret);
+ return;
+ }
+
+ linear = of_property_read_bool(child_node,
+ "ti,linear-mapping-mode");
+
+ for (i = 0; i < num_sources; i++) {
+ if (sources[i] == 0)
+ pchip->pdata->leda_ctrl = linear ?
+ LM3630A_LEDA_ENABLE_LINEAR :
+ LM3630A_LEDA_ENABLE;
+ else if (sources[i] == 1)
+ pchip->pdata->ledb_ctrl = linear ?
+ LM3630A_LEDB_ENABLE_LINEAR :
+ LM3630A_LEDB_ENABLE;
+
+ ret = of_property_read_u32(child_node,
+ "default-brightness", &val);
+ if (!ret) {
+ if (sources[i] == 0)
+ pchip->pdata->leda_init_brt = val;
+ else if (sources[i] == 1)
+ pchip->pdata->ledb_init_brt = val;
+ }
+
+ ret = of_property_read_u32(child_node, "max-brightness",
+ &val);
+ if (!ret) {
+ if (sources[i] == 0)
+ pchip->pdata->leda_max_brt = val;
+ else if (sources[i] == 1)
+ pchip->pdata->ledb_max_brt = val;
+ }
+ }
+ };
+}
+
static int lm3630a_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -405,6 +466,7 @@ static int lm3630a_probe(struct i2c_client *client,
pdata->ledb_init_brt = LM3630A_MAX_BRIGHTNESS;
}
pchip->pdata = pdata;
+ lm3630a_parse_dt(pchip);

/* chip initialize */
rval = lm3630a_chip_init(pchip);
@@ -470,11 +532,18 @@ static const struct i2c_device_id lm3630a_id[] = {
{}
};

+static const struct of_device_id lm3630a_match_table[] = {
+ { .compatible = "ti,lm3630a", },
+ { },
+};
+
+
MODULE_DEVICE_TABLE(i2c, lm3630a_id);

static struct i2c_driver lm3630a_i2c_driver = {
.driver = {
.name = LM3630A_NAME,
+ .of_match_table = lm3630a_match_table,
},
.probe = lm3630a_probe,
.remove = lm3630a_remove,
--
2.20.1
\
 
 \ /
  Last update: 2019-04-01 12:31    [W:0.110 / U:5.692 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site