lkml.org 
[lkml]   [2019]   [Apr]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/3] backlight: lm3630a: return 0 on success in update_status functions
Date
lm3630a_bank_a_update_status() and lm3630a_bank_b_update_status()
both return the brightness value if the brightness was successfully
updated. Writing to these attributes via sysfs would cause a 'Bad
address' error to be returned. These functions should return 0 on
success, so let's change it to correct that error.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Fixes: 28e64a68a2ef ("backlight: lm3630: apply chip revision")
---
drivers/video/backlight/lm3630a_bl.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/video/backlight/lm3630a_bl.c b/drivers/video/backlight/lm3630a_bl.c
index 2030a6b77a09..ef2553f452ca 100644
--- a/drivers/video/backlight/lm3630a_bl.c
+++ b/drivers/video/backlight/lm3630a_bl.c
@@ -201,7 +201,7 @@ static int lm3630a_bank_a_update_status(struct backlight_device *bl)
LM3630A_LEDA_ENABLE, LM3630A_LEDA_ENABLE);
if (ret < 0)
goto out_i2c_err;
- return bl->props.brightness;
+ return 0;

out_i2c_err:
dev_err(pchip->dev, "i2c failed to access\n");
@@ -278,7 +278,7 @@ static int lm3630a_bank_b_update_status(struct backlight_device *bl)
LM3630A_LEDB_ENABLE, LM3630A_LEDB_ENABLE);
if (ret < 0)
goto out_i2c_err;
- return bl->props.brightness;
+ return 0;

out_i2c_err:
dev_err(pchip->dev, "i2c failed to access REG_CTRL\n");
--
2.20.1
\
 
 \ /
  Last update: 2019-04-01 12:31    [W:0.197 / U:23.068 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site