lkml.org 
[lkml]   [2019]   [Apr]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [PATCH 1/5] dt-bindings: arm: atmel: add bindings for PIT64B
Date
On 14/03/2019 at 17:26, Claudiu Beznea - M18063 wrote:
> From: Claudiu Beznea <claudiu.beznea@microchip.com>
>
> Add device tree bindings for PIT64B timer.
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>

Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>

> ---
> Documentation/devicetree/bindings/arm/atmel-sysregs.txt | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
> index 14f319f694b7..c7b7ead7966b 100644
> --- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
> +++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
> @@ -10,6 +10,13 @@ PIT Timer required properties:
> - interrupts: Should contain interrupt for the PIT which is the IRQ line
> shared across all System Controller members.
>
> +PIT64B Timer required properties:
> +- compatible: Should be "microchip,sam9x60-pit64b"
> +- reg: Should contain registers location and length
> +- clock-frequency: Should contain PIT64B timer frequency
> +- interrupts: Should contain interrupt for PIT64B timer
> +- clocks: Should contain the available clock sources for PIT64B timer.
> +
> System Timer (ST) required properties:
> - compatible: Should be "atmel,at91rm9200-st", "syscon", "simple-mfd"
> - reg: Should contain registers location and length
>


--
Nicolas Ferre
\
 
 \ /
  Last update: 2019-04-01 10:41    [W:0.165 / U:1.444 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site