lkml.org 
[lkml]   [2019]   [Apr]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] ASoC: rt5677: allow multiple interrupt sources
Date
From: Ben Zhang <benzh@chromium.org>

This patch allows headphone plug detect and mic present
detect to be enabled at the same time. This patch implements
an irq_chip with irq_domain directly instead of using
regmap_irq, so that interrupt source line polarities can
be flipped to support irq sharing.

Signed-off-by: Ben Zhang <benzh@chromium.org>
Signed-off-by: Fletcher Woodruff <fletcherw@chromium.org>
---
sound/soc/codecs/rt5677.c | 261 ++++++++++++++++++++++++++++----------
sound/soc/codecs/rt5677.h | 14 +-
2 files changed, 208 insertions(+), 67 deletions(-)

diff --git a/sound/soc/codecs/rt5677.c b/sound/soc/codecs/rt5677.c
index 9b7a1833d3316c..33380f82b7008f 100644
--- a/sound/soc/codecs/rt5677.c
+++ b/sound/soc/codecs/rt5677.c
@@ -23,6 +23,10 @@
#include <linux/firmware.h>
#include <linux/of_device.h>
#include <linux/property.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/irqdomain.h>
+#include <linux/workqueue.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
@@ -4620,7 +4624,6 @@ static void rt5677_gpio_config(struct rt5677_priv *rt5677, unsigned offset,
static int rt5677_to_irq(struct gpio_chip *chip, unsigned offset)
{
struct rt5677_priv *rt5677 = gpiochip_get_data(chip);
- struct regmap_irq_chip_data *data = rt5677->irq_data;
int irq;

if ((rt5677->pdata.jd1_gpio == 1 && offset == RT5677_GPIO1) ||
@@ -4646,7 +4649,7 @@ static int rt5677_to_irq(struct gpio_chip *chip, unsigned offset)
return -ENXIO;
}

- return regmap_irq_get_virq(data, irq);
+ return irq_create_mapping(rt5677->domain, irq);
}

static const struct gpio_chip rt5677_template_chip = {
@@ -4716,37 +4719,13 @@ static int rt5677_probe(struct snd_soc_component *component)

snd_soc_component_force_bias_level(component, SND_SOC_BIAS_OFF);

- regmap_write(rt5677->regmap, RT5677_DIG_MISC, 0x0020);
+ regmap_update_bits(rt5677->regmap, RT5677_DIG_MISC,
+ ~RT5677_IRQ_DEBOUNCE_SEL_MASK, 0x0020);
regmap_write(rt5677->regmap, RT5677_PWR_DSP2, 0x0c00);

for (i = 0; i < RT5677_GPIO_NUM; i++)
rt5677_gpio_config(rt5677, i, rt5677->pdata.gpio_config[i]);

- if (rt5677->irq_data) {
- regmap_update_bits(rt5677->regmap, RT5677_GPIO_CTRL1, 0x8000,
- 0x8000);
- regmap_update_bits(rt5677->regmap, RT5677_DIG_MISC, 0x0018,
- 0x0008);
-
- if (rt5677->pdata.jd1_gpio)
- regmap_update_bits(rt5677->regmap, RT5677_JD_CTRL1,
- RT5677_SEL_GPIO_JD1_MASK,
- rt5677->pdata.jd1_gpio <<
- RT5677_SEL_GPIO_JD1_SFT);
-
- if (rt5677->pdata.jd2_gpio)
- regmap_update_bits(rt5677->regmap, RT5677_JD_CTRL1,
- RT5677_SEL_GPIO_JD2_MASK,
- rt5677->pdata.jd2_gpio <<
- RT5677_SEL_GPIO_JD2_SFT);
-
- if (rt5677->pdata.jd3_gpio)
- regmap_update_bits(rt5677->regmap, RT5677_JD_CTRL1,
- RT5677_SEL_GPIO_JD3_MASK,
- rt5677->pdata.jd3_gpio <<
- RT5677_SEL_GPIO_JD3_SFT);
- }
-
mutex_init(&rt5677->dsp_cmd_lock);
mutex_init(&rt5677->dsp_pri_lock);

@@ -5063,65 +5042,215 @@ static void rt5677_read_device_properties(struct rt5677_priv *rt5677,
&rt5677->pdata.jd3_gpio);
}

-static struct regmap_irq rt5677_irqs[] = {
+struct rt5677_irq_desc {
+ unsigned int enable_mask;
+ unsigned int status_mask;
+ unsigned int polarity_mask;
+};
+
+static const struct rt5677_irq_desc rt5677_irq_descs[] = {
[RT5677_IRQ_JD1] = {
- .reg_offset = 0,
- .mask = RT5677_EN_IRQ_GPIO_JD1,
+ .enable_mask = RT5677_EN_IRQ_GPIO_JD1,
+ .status_mask = RT5677_STA_GPIO_JD1,
+ .polarity_mask = RT5677_INV_GPIO_JD1,
},
[RT5677_IRQ_JD2] = {
- .reg_offset = 0,
- .mask = RT5677_EN_IRQ_GPIO_JD2,
+ .enable_mask = RT5677_EN_IRQ_GPIO_JD2,
+ .status_mask = RT5677_STA_GPIO_JD2,
+ .polarity_mask = RT5677_INV_GPIO_JD2,
},
[RT5677_IRQ_JD3] = {
- .reg_offset = 0,
- .mask = RT5677_EN_IRQ_GPIO_JD3,
+ .enable_mask = RT5677_EN_IRQ_GPIO_JD3,
+ .status_mask = RT5677_STA_GPIO_JD3,
+ .polarity_mask = RT5677_INV_GPIO_JD3,
},
};
+static irqreturn_t rt5677_irq(int unused, void *data)
+{
+ struct rt5677_priv *rt5677 = data;
+ int ret = 0, i, loop, reg_irq, virq;
+ bool irq_fired;
+
+ mutex_lock(&rt5677->irq_lock);
+ /*
+ * Loop to handle interrupts until the last i2c read shows no pending
+ * irqs. The interrupt line is shared by multiple interrupt sources.
+ * After the regmap_read() below, a new interrupt source line may
+ * become high before the regmap_write() finishes, so there isn't a
+ * rising edge on the shared interrupt line for the new interrupt. Thus,
+ * the loop is needed to avoid missing irqs.
+ *
+ * A safeguard of 20 loops is used to avoid hanging in the irq handler
+ * if there is something wrong with the interrupt status update. The
+ * interrupt sources here are audio jack plug/unplug events which
+ * shouldn't happen at a high frequency for a long period of time.
+ * Empirically, more than 3 loops have never been seen.
+ */
+ for (loop = 0; loop < 20; loop++) {
+ /* Read interrupt status */
+ ret = regmap_read(rt5677->regmap, RT5677_IRQ_CTRL1, &reg_irq);
+ if (ret)
+ break;
+ /*
+ * Clear the interrupt by flipping the polarity of the
+ * interrupt source lines that just fired
+ */
+ irq_fired = false;
+ for (i = 0; i < RT5677_IRQ_NUM; i++) {
+ if (reg_irq & rt5677_irq_descs[i].status_mask) {
+ reg_irq ^= rt5677_irq_descs[i].polarity_mask;
+ irq_fired = true;
+ }
+ }
+ if (!irq_fired)
+ break;

-static struct regmap_irq_chip rt5677_irq_chip = {
- .name = "rt5677",
- .irqs = rt5677_irqs,
- .num_irqs = ARRAY_SIZE(rt5677_irqs),
+ ret = regmap_write(rt5677->regmap, RT5677_IRQ_CTRL1, reg_irq);
+ if (ret)
+ break;

- .num_regs = 1,
- .status_base = RT5677_IRQ_CTRL1,
- .mask_base = RT5677_IRQ_CTRL1,
- .mask_invert = 1,
-};
+ /* Process interrupts */
+ for (i = 0; i < RT5677_IRQ_NUM; i++) {
+ if ((reg_irq & rt5677_irq_descs[i].enable_mask) &&
+ (reg_irq & rt5677_irq_descs[i].status_mask)) {
+ virq = irq_find_mapping(rt5677->domain, i);
+ if (virq)
+ handle_nested_irq(virq);
+ }
+ }
+ }
+ mutex_unlock(&rt5677->irq_lock);
+ return IRQ_HANDLED;
+}
+static void rt5677_irq_work(struct work_struct *work)
+{
+ struct rt5677_priv *rt5677 =
+ container_of(work, struct rt5677_priv, irq_work.work);
+
+ rt5677_irq(0, rt5677);
+}

-static int rt5677_init_irq(struct i2c_client *i2c)
+static void rt5677_irq_bus_lock(struct irq_data *data)
{
- int ret;
- struct rt5677_priv *rt5677 = i2c_get_clientdata(i2c);
+ struct rt5677_priv *rt5677 = irq_data_get_irq_chip_data(data);

- if (!rt5677->pdata.jd1_gpio &&
- !rt5677->pdata.jd2_gpio &&
- !rt5677->pdata.jd3_gpio)
- return 0;
+ mutex_lock(&rt5677->irq_lock);
+}

- if (!i2c->irq) {
- dev_err(&i2c->dev, "No interrupt specified\n");
- return -EINVAL;
- }
+static void rt5677_irq_bus_sync_unlock(struct irq_data *data)
+{
+ struct rt5677_priv *rt5677 = irq_data_get_irq_chip_data(data);

- ret = regmap_add_irq_chip(rt5677->regmap, i2c->irq,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT, 0,
- &rt5677_irq_chip, &rt5677->irq_data);
+ regmap_update_bits(rt5677->regmap, RT5677_IRQ_CTRL1,
+ RT5677_EN_IRQ_GPIO_JD1 | RT5677_EN_IRQ_GPIO_JD2 |
+ RT5677_EN_IRQ_GPIO_JD3, rt5677->irq_en);
+ mutex_unlock(&rt5677->irq_lock);
+}

- if (ret != 0) {
- dev_err(&i2c->dev, "Failed to register IRQ chip: %d\n", ret);
- return ret;
- }
+static void rt5677_irq_enable(struct irq_data *data)
+{
+ struct rt5677_priv *rt5677 = irq_data_get_irq_chip_data(data);
+
+ rt5677->irq_en |= rt5677_irq_descs[data->hwirq].enable_mask;
+}
+
+static void rt5677_irq_disable(struct irq_data *data)
+{
+ struct rt5677_priv *rt5677 = irq_data_get_irq_chip_data(data);
+
+ rt5677->irq_en &= ~rt5677_irq_descs[data->hwirq].enable_mask;
+}

+static struct irq_chip rt5677_irq_chip = {
+ .name = "rt5677_irq_chip",
+ .irq_bus_lock = rt5677_irq_bus_lock,
+ .irq_bus_sync_unlock = rt5677_irq_bus_sync_unlock,
+ .irq_disable = rt5677_irq_disable,
+ .irq_enable = rt5677_irq_enable,
+};
+
+static int rt5677_irq_map(struct irq_domain *h, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ struct rt5677_priv *rt5677 = h->host_data;
+
+ irq_set_chip_data(virq, rt5677);
+ irq_set_chip(virq, &rt5677_irq_chip);
+ irq_set_nested_thread(virq, 1);
+ irq_set_noprobe(virq);
return 0;
}

-static void rt5677_free_irq(struct i2c_client *i2c)
+
+static const struct irq_domain_ops rt5677_domain_ops = {
+ .map = rt5677_irq_map,
+ .xlate = irq_domain_xlate_twocell,
+};
+
+static void rt5677_init_irq(struct i2c_client *i2c)
+{
+ struct rt5677_priv *rt5677 = i2c_get_clientdata(i2c);
+ int ret;
+ unsigned int jd_mask = 0, jd_val = 0;
+
+ /* No irq has been assigned to the codec */
+ if (!i2c->irq)
+ return;
+
+ mutex_init(&rt5677->irq_lock);
+ INIT_DELAYED_WORK(&rt5677->irq_work, rt5677_irq_work);
+
+ /*
+ * Select RC as the debounce clock so that GPIO works even when
+ * MCLK is gated which happens when there is no audio stream
+ * (SND_SOC_BIAS_OFF).
+ */
+ regmap_update_bits(rt5677->regmap, RT5677_DIG_MISC,
+ RT5677_IRQ_DEBOUNCE_SEL_MASK,
+ RT5677_IRQ_DEBOUNCE_SEL_RC);
+ /* Enable auto power on RC when GPIO states are changed */
+ regmap_update_bits(rt5677->regmap, RT5677_GEN_CTRL1, 0xff, 0xff);
+
+ /* Select and enable jack detection sources per platform data */
+ if (rt5677->pdata.jd1_gpio) {
+ jd_mask |= RT5677_SEL_GPIO_JD1_MASK;
+ jd_val |= rt5677->pdata.jd1_gpio << RT5677_SEL_GPIO_JD1_SFT;
+ }
+ if (rt5677->pdata.jd2_gpio) {
+ jd_mask |= RT5677_SEL_GPIO_JD2_MASK;
+ jd_val |= rt5677->pdata.jd2_gpio << RT5677_SEL_GPIO_JD2_SFT;
+ }
+ if (rt5677->pdata.jd3_gpio) {
+ jd_mask |= RT5677_SEL_GPIO_JD3_MASK;
+ jd_val |= rt5677->pdata.jd3_gpio << RT5677_SEL_GPIO_JD3_SFT;
+ }
+ regmap_update_bits(rt5677->regmap, RT5677_JD_CTRL1, jd_mask, jd_val);
+
+ /* Set GPIO1 pin to be IRQ output */
+ regmap_update_bits(rt5677->regmap, RT5677_GPIO_CTRL1,
+ RT5677_GPIO1_PIN_MASK, RT5677_GPIO1_PIN_IRQ);
+
+ /* Ready to listen for interrupts */
+ rt5677->domain = irq_domain_add_linear(i2c->dev.of_node,
+ RT5677_IRQ_NUM, &rt5677_domain_ops, rt5677);
+ if (!rt5677->domain) {
+ dev_err(&i2c->dev, "Failed to create IRQ domain\n");
+ return;
+ }
+ ret = devm_request_threaded_irq(&i2c->dev, i2c->irq, NULL, rt5677_irq,
+ IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+ "rt5677", rt5677);
+ if (ret) {
+ dev_err(&i2c->dev, "Failed to request IRQ: %d\n", ret);
+ return;
+ }
+}
+
+static void rt5677_irq_exit(struct i2c_client *i2c)
{
struct rt5677_priv *rt5677 = i2c_get_clientdata(i2c);

- if (rt5677->irq_data)
- regmap_del_irq_chip(i2c->irq, rt5677->irq_data);
+ cancel_delayed_work_sync(&rt5677->irq_work);
}

static int rt5677_i2c_probe(struct i2c_client *i2c)
@@ -5259,7 +5388,7 @@ static int rt5677_i2c_probe(struct i2c_client *i2c)

static int rt5677_i2c_remove(struct i2c_client *i2c)
{
- rt5677_free_irq(i2c);
+ rt5677_irq_exit(i2c);
rt5677_free_gpio(i2c);

return 0;
diff --git a/sound/soc/codecs/rt5677.h b/sound/soc/codecs/rt5677.h
index 183d92b030459f..9c73bea8635508 100644
--- a/sound/soc/codecs/rt5677.h
+++ b/sound/soc/codecs/rt5677.h
@@ -1636,6 +1636,12 @@
#define RT5677_GPIO6_P_NOR (0x0 << 0)
#define RT5677_GPIO6_P_INV (0x1 << 0)

+/* General Control (0xfa) */
+#define RT5677_IRQ_DEBOUNCE_SEL_MASK (0x3 << 3)
+#define RT5677_IRQ_DEBOUNCE_SEL_MCLK (0x0 << 3)
+#define RT5677_IRQ_DEBOUNCE_SEL_RC (0x1 << 3)
+#define RT5677_IRQ_DEBOUNCE_SEL_SLIM (0x2 << 3)
+
/* Virtual DSP Mixer Control (0xf7 0xf8 0xf9) */
#define RT5677_DSP_IB_01_H (0x1 << 15)
#define RT5677_DSP_IB_01_H_SFT 15
@@ -1713,6 +1719,7 @@ enum {
RT5677_IRQ_JD1,
RT5677_IRQ_JD2,
RT5677_IRQ_JD3,
+ RT5677_IRQ_NUM,
};

enum rt5677_type {
@@ -1811,9 +1818,14 @@ struct rt5677_priv {
struct gpio_chip gpio_chip;
#endif
bool dsp_vad_en;
- struct regmap_irq_chip_data *irq_data;
bool is_dsp_mode;
bool is_vref_slow;
+
+ /* Interrupt handling */
+ struct irq_domain *domain;
+ struct mutex irq_lock;
+ unsigned int irq_en;
+ struct delayed_work irq_work;
};

int rt5677_sel_asrc_clk_src(struct snd_soc_component *component,
--
2.21.0.392.gf8f6787159e-goog
\
 
 \ /
  Last update: 2019-04-01 22:55    [W:0.113 / U:13.628 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site